RealTruckTruXedo Pro X15 Soft Roll Up Truck Bed Tonneau Cover | 1430601 | Fits 2017-2024 Honda Ridgeline 5' 4" Bed (64")

The pre drilled holes to attached the side rails to the mounting brackets were 2 inches off from where they should be. Had to drill my own holes to mount it correctly, otherwise very easy to install.

My Ridgeline is 16 years old. When I bought it, I bought this same exact roll up. I will say it was pretty inexpensive back then, but, times have changed.The Arizona sun took its toll on it over the past 12 years. It ate away at the seals, velcro and anything else not metal. I just removed it one day.I have been wanting it again but was hoping for a sale price. Finally, I jumped on a reduced price from an apparent return.Glad I did! It came repackaged, but secure. No marks or blemishes and all hardware included.As most people know, there are major differences in tonneau. This roll up doesn't lock, isn't 100% weather/waterproof, and doesn't support much weight on top of it.It does look amazing, keeps things out of sight, out of mind, is for the most part cost worthy and helps protect things from most elements.I highly recommend this tonneau, especially if you see it at a discounted price.

It does the job but it leaks from the corners, not heavily so you should be fine and also I’m taking in consideration that my installation isn’t 100% perfect.

Ok, I just installed this Truxedo LoPro cover on my 2011 Honda Ridgeline (gen1) and I wanted to share this info even though it's an old truck. I recently found a need to add a cover to the bed, and since finding a new vehicle is next to impossible without paying over retail, I'm getting all I can out of this truck.I will say the finished product looks great and seems very well made (time will tell and I will update "value" and "durability" in the future.The install was pretty straight forward and I will say that the vendor added a sheet with specific instructions and pics for installing on a Gen 1 Ridgeline, which was great. It was not without moments of extreme sweat and minor frustration trying to get the bolts in on the side rails. There are foam pieces on the rails (and one you need to add to the tie-down holes) that get in the way, so you have to maneuver around them to get the bolts started - took some time, but worked, and the foam seems to be helpful with the seal. I did have a friend assist by holding the rails in place but I'm sure you could do this alone. Once installed, the adjustment to the cover is pretty simple. A few twists of the screw bolt and it locked nice and tight. Total install time about 50 minutes.I added pics of the Velcro side seal - I didn't have any issue with the sides being too short as I saw at least one review that stated that.Also, pics of the back tailgate seal and bulkhead seal - both seem pretty darned good.I added pics of the trunk open with and without the cover pulled back - there is plenty of access, so no issue at least for me there.All in all, I'm quite pleased with the look and operation; time will tell if it can stand up to the elements and heavy usage. I would definitely recommend this based on my initial experience.

A quality product that is easy to install.

The media could not be loaded.  Really like this Truxedo Lo Pro tonneau cover on my 2022 Ridgeline! The install was not too difficult, though the rails were a bit tricky to get pushed forward enough to ensure the release button (which IMO should be placed on the passenger rail folks), isn't pushed or rubbing against the gate. It is especially noticed when opening the door sideways vs. just pulling it down. The latches in the front near cab need to be fully pushed in in order to ensure proper securing, which I found on one side to be very difficult to do but finally got it locked in place. They need to lock in until the metal tab pops out..(not clear in diagrams). Overall happy with the fairly easy install which took under an hour (but could be as little as 30min if everything goes easy).

Fits my 2022 Ridgeline like a glove and looks great. Very easy to install, but the truck-specific instructions did not mention the weatherstripping, but the "next steps" do. So I had to take it out, put in the weatherstripping, and reinstall. Even still it only took a bit over 30 minutes to put in. You almost can't mess up rolling it out or back, even if it's just you working on one side. It's about 99.99% rainproof, a couple big storms have gotten a small amount of water in the bed but nothing concerning to the cargo.The rails are recessed but do affect the opening of the trunk to about 75-80%. Plenty enough to get stuff in and out of the trunk and get the spare out, but not fully open. Also, the unlock lever is on the driver side and you can really only unlock the cover with the tailgate is down, not opened to the side.Update: You can change the latch from the left to the right rail very easily. For Ridgeline owners, the right side has a little less room than the left but is accessible when you open the tailgate like a door.

Easily installed on my Honda Ridgeline with just a medium Phillips head, a 7/16 ratchet & T30 Torx wrench. Took about 45 minutes. Looks great & seems like a very solid product. Saw some Lon-term reviews on line that gave it high marks, so we’ll see how it holds up to Wisconsin weather over time. Very pleased so far.

I use my truck to transport my motorcycle and needed a tonneau cover that did not take up any space when it's open. This cover is perfect for my application. When it's opened, it does not occupy any bed space, it's also quickly removable once opened with the 2 quick release tabs. It's a quality made product and have used it on other trucks in the past. Even though this vendor is located in the US, the product was shipped directly from Ontario and I had it within a week, no additional taxes or fees, the price you pay on Amazon is the final price and delivery was included.

I have never installed a Tonneau Cover before so it took me an hour + 4 Beers to complete :) The installation was not painful as the correct hardware is supplied for your Ridgeline (No drilling or special tools required), unfortunately I failed to take the advice of other reviewers and didn't move the drivers-side locking leaver to the passengers side before installing the rails, as a result I had to undo the rails to access the bolt to remove the rear cover latch, painful because the job was completed at that point. the latching lock fits on either side with no issues as the bolt holes are already there. Another tip is , you will find bolt-like screw tightener on each side of the cover closest to the back window, back those cover tightening screws out with a common-flat screw driver all the way until there is only one or two bolt treads showing, if not your cover will be too tight to close/latch and you may try to force it, maybe damaging the cover. if you find that the cover is not tight enough you can tighten those screws in a small bit at a time until your happy with the covers tightness. I really like the cover, I had a hard tri-fold on my Ram and it was so heavy, a pain to remove and it would block my back window when latched open. unless you feel the need to stand or have a party on your Tonneau Cover a Hard cover is not required, a soft cover takes up less space in that small Ridgeline truck-box and its half the price of a hard cover.

This item is well engineered and fits perfectly. Installation took @ 30 minutes, following the directions. I did change the latch from the drivers side to the passenger side to better accommodate the swing away tail gate - no modifications necessary - just unbolt the latches and swap them left to right. It looks and works great - just what I wanted

Instructions were misleading on one step. Being mechanically inclined I was able to figure out.Didn’t thoroughly relate how to roll the cover underneath the side rails so the push clamps thoroughly engaged.Very pleased with quality of item.

Half an hour install for me. $165 for a shop to install!No tricks or modifications needed.Sits an inch higher than I would have wanted