Greallthy Bike Bell Classic Brass Bicycle Bell,Bike Bells for Adults Kids,Loud Sound Bells Fit for 0.87-1.25in/22.2-31.8mm Bicycle Handlebars,Road Mountain Bike Accessories.

Best bell Ive had yet.Solid build, easy install using the supplied hex wrench and both of the supplied silicone bushing's for a tight, scratch free fit on the my handle bar.I get 2-3 good clear loud rings to signal my approach on the flat Polly Ann rail trail in Oakland County ,Mi.

This bell has a nice, piercing, loud, distinctive ring. It is perfect for two lane trails shared by bicyclists, pedestrians, runners, families with strollers, etc. This bell is very effective at warning people ahead that a cyclist is approaching, and they instantly move or stay in their lane so the cyclist can pass unseen on their left.The clapper is spring loaded requiring the cyclist to allow the lever to snap at the bell. However, under constant ringing, this can potentilly cause irritation to the bellringer's thumb. Thus the reason for only 4 stars instead of 5.The clapper must "snap" in order for the bell to ring.I would suggest gloves covering the thumb in winter, and otherwise practicing a technique whereby the thumbnail does most of the interaction with the spring mechanism. One could probably also wear some sort of protective bandaide or other covering on the thumb. The user will have to decide what is best for their circumstances.There are other bells easier to ring, but this one is very loud and distinctive, and for me, worth the inconvenience of learning the "thumbnail technique."UPDATE TO MY INITIAL REVIEWI love this bell, and I would definitely buy it again. PLEASE NOTE: I added a modification that I would like to share.Using Wedgewood Contact Cement, I attached a strip of tough polyester fabric to the metalic ringer mechanism. This tough but soft fabric protects the thumb from chaffing when ringing the bell (Please see photo). I suggest that a small strip of soft leather would work just as well and perhaps be even more durable. With this easy improvement, I can now raise my rating from 4 to 5 stars.

This is a great bell--and an excellent value here on amazon. I purchased two of them (one for my wife and one for myself). It has a small footprint, however it produces excellent (pleasant) sound with great volume. It is constructed of high quality materials and fit both of our bicycle's handlebars just fine--this even though one bicycle had 21.5 mm handlebars and the other 22.5 mm handlebars. The included rubber inserts (two thin ones, and two thick ones) allows this bell to fit a wide range handlebar thicknesses. Oh, and a nice little Allen wrench is also included. One can actually reduce the volume simply by not pressing down so far on the thumb trigger. We use this method on quieter smooth/nicely paved bicycle paths. If we need a louder volume, i.e., for those walkers/riders using earbuds, etc., we simply press the thumb trigger all the way down and then release it, thus causing the same pleasant ringing, albeit being much louder. There are a few comments by people saying this bell is difficult to install. Nonsense! It literally take less than five minutes! Do yourself a favor and purchase this bell. You will not be disappointed.

Reasonably easy to mount. A simple mechanism that suggests durability. Loud enough. Great for overtaking pedestrians or slower bikes without having to call out to them. A bell is much more friendly.

I needed a bell to replace the one that came on my ebike. This bell looks good and has a nice inoffensive tone to it. I really like it.

This was perfect for the cost.

PROS:- All metal construction (including handlebar clamp), so it won't break.- Comes with two sizes of handlebar clamps and two foam inserts (one thick, one thin) to ensure a good fit with just about any handlebar. Foam inserts also protect the handlebar from being scratched by the metal clamp.- Nice, loud ring, the loudness of which can be varied by how far back you pull the striker before releasing it.- Adjustable distance between striker and bell to allow for lighter strikes (and slightly quieter ring, if preferred).CONS - The striker lever is bare metal with a rather coarse edge, which causes your thumb pad to feel a little raw and sore after just a few uses. Mitigated by using your thumbnail or inner part of the knuckle to pull the striker back. Would have been much better with a silicone cover or other similar soft/cushioned cover.- Screw for tightening the clamp must be screwed in from the bottom. This makes installation more difficult than it has to be and results in the stem of the screw sticking straight up through the clamp. Would have been better to have the clamp screwed tight from the top, making installation easier and resulting in a nice, flush screw head visible with the screw stem nearly invisible.It's a decent bell, but, if I had to do it all over again, I would probably go with one that was easier on the thumbs.

Good noisy bike bell

Needed to upgrade from my dollar store bell. This one is loud and easy to operate. Comes with 2 different sized bands to fit under it over the handle bars. Use on my cannondale quick.

These are great bells. They have a load ring that has a real carryover kind of like a tuning fork does. I use it on my ebike and I would highly recommend it. 👍

Pretty good bike bell. A little awkward to install with the inner band but gives out a loud ring that's great for the path I bike on which has a lot of walkers. Price is a little on the high side.

Really nice bicycle bell and easy to fit. Sounds loud enough to warn pedestrians of bicycle presence. Worth the purchase price.

Si sente benissimo, facile installazione e si può adattare a più diametri del manubrio…