Comfort Zone CZQTV5M 750/1,500-Watt Ceiling Mounted Dual Quartz Radiant Heater with 90-Degree Adjustable Tilt, Metal Safety Grille, Overheat Protection (Hardware Included), Black

I’ve been dealing with a cold garage here in Colorado, and wanted some kind of heat source to knock the edge off that cold while I work. It won’t heat the whole garage, but it works well with it hanging nearby and pointed at me. I typically will run it on high (setting II) for a few minutes, then drop it back down to low (setting I) for the rest of the time I’m working. It doesn’t make me toasty, but it definitely warms me enough to be reasonably comfortable. I ran this heater through an outlet tester to see what it was drawing. On setting II, it draws about 1350 watts and on setting I, it draws about 690 watts. Very happy I got this heater.

Easy enough to install. I mounted it my garage, it keeps the whole space warm. Has 3 heat settings.

Fire hazard NOT UL listed or UL compliant on grounding! Lasts for about 1 week and burns out!After this heater failed (both elements burned out) I took the side panel off to find the ground was not secured properly to the chassis. It was attached via a sheet metal screw with no locking mechanism like required by UL products that have a green screw with locktight/locking head. The big hint on label is "conforms to UL" instead of the typical "UL listed" stamp. Each tube lasted about 1 week in a cold shop. I did notice both tubes tended to have a hot spot, which seems to get more hot than the rest of the element/tube. Keep in mind that this is radiant heat and it does not heat a space, but only the occupant or whatever it is pointed at. I was hoping to use it on low 750W to keep the shop dry like typically done with heat lamps. I noticed many reviews of element failures in first week of usage. Wish I had read them before wasting money on this unsafe heater! I guess I am happy just to not burn my shop down ... and not have any insurance coverage due to using non-UL listed items as Amazon so frequently sells today.

I ordered 2 of these. One of them arrived broken and I missed the return window. The other one works great. It is mounted in our party barn and works well. The broken one had a broken tube, which probably happened during shipping. Ive used the other one non stop during our cold spell and it has worked just fine.

I live in the North East and winters are cold! I have a poll barn that I use daily and let me tell you these heaters are life savers during the winter months. Plugs in and warms up quickly! Just make sure you are aware of how many feet your trying to heat up as one may not cut it. I own 3 of these and taught a 4th incase of emergency's so if piper gos out I can put one of these in my basement and keep the pipes from freezing and also provide some warmth for the basement.. These heaters are easy to install. Pumps out all the heat you may need and works grate! Just be advised you read the instructions on cleaning these as dust on these things smell horrible and they require a whip down every now and again.. Oh! and for those of you like my self trying to keep cost down these things don't run up your bill all that much ,, Or at least thats what I feel, as I have used other electric and none electric heaters in the winters and some can be rather costly.. Anyways ive rambled enough .. if your looking for a good heater that is easy to install, reliable and pumps out the warmth your looking for then give this product a try..

3 stars because one of them works as it should.I recently purchased 2 of these heaters. The first one I installed works fantastic, it heats up the left side of my 2 car garage. The second one, after install, I pulled the cord to turn it on and I was showered in sparks and it blew my breaker. I unplug the heater and removed it from its mount. When I looked inside near the the pull cord where the sparks came from I could see char marks at the bulb connection. I shined a light inside and noticed that the clip that holds the bulb in place was missing on this side. The soldered connection was resting right on the metal frame which caused the sparks, charring and my blown breaker. I re-examined the first one and it appears to have both clips and it’s functioning normally and working well. I just wish I had 2. Probably won’t purchase this item again. If you do, look at it very closely to make sure all screws, connections and brackets are present and sturdy.

This product is exactly as described. It has dual settings. You can run either the left or the right side or both at the same time as a thermostat was easy to mount. We put it in our 800 square-foot shop as a great output of heat, the noise level is just a very nice hum sound, it’s a great value for the money. It was easy to install. We are very happy with the product. It makes our shop very warm.It adds lots of comfort to our shop and it does have a thermostat and it will auto shut off, I’m very pleased with this product

Works great