TUFFIOM 10-Ton Hydraulic Shop Press with Pressure Gauge & Press Plates, H-Frame Adjustable Working Table Height Garage Benchtop Press, Red, 23.5”L x 19.5”W x 40”H

All good but the severely loose cylinder.The ram won’t stop leaking even after tightening the jam nut on the seal.The cylinder ram seems to have a smaller diameter than needed. The ram end needed turned on the lathe to make it fit properly on the ram end to be square.Of the cylinder didn’t leak I would be happyI sent a message and will follow up with what happens.UPDATE. seller took care of the problem very fastI am completely satisfied

Used press to install new gears in mini mill. Setup makes it easy to hold parts with one hand while pumping / releasing with the other. Hydraulic oil dribbling out reservoir will require disassembly and tape / tighten / loosen / retape / tighten session to make sure mounts are lined up when tightened. Prolly why it leaked from factory.

I had a problem with the hydraulic cylinder on this Hydraulic Shop Press but did not develop a problem with it until sometime after the return period had expired. I contacted Tuffiom and they sent me a replacement cylinder at no charge and did not request a return of the original cylinder. They are a super supplier, and I highly recommend their products.

The Good:* All major pieces arrived* No major leaks.* Taped points never leaked.* Pound / dollar it's still cheaper to buy and fix this.* Fixing most of it is not difficult, but takes some knowledge.The Bad:* Came in pieces rattling around with a hole. Cannot say more on this because Amazon doesn't like it.* Paint was chipped in many places.* Missing lock washers.* Pump handle rattles without using washers as spacers.* Missing a large rubber O-ring in the pump cylinder. Minor leak just sitting unpressurized.* Piston leaks some oil when put under pressure. Have not disassembled it yet, but it is likely also missing a seal.* You will have to look up how to bleed the system before use. This is the same for all presses like this, but is not immediately apparent.

This unit arrived and was put into service, straight away the hydraulic guage was leaking, poor machine work. We retaped the guage threads a few times and resolved that leak. Now the seals to the hydrualic ram are leaking and the unit is unuseable. This unit has never been used beyond half the capacity it was stated to be rated for. I purchased a unit with twice the capacity as to what was needed. The unit has only been in service for three months and only occasionaly. I request to return and full refund as I have no faith that a replacement will yield a different result. Please advise asap.

This unit is built very well and the after sale support was outstanding. I highly recommend this unit.

I bought this to work on smaller things like pinions and driveshafts for a few old cars I’m working on.In general it’s a good press. But, here are my issues and why I deducted a star.The collars that hold the press cylinder in place don’t have any detents or notches to hold on to while trying to tighten everything down. Sure, you can use a pipe wrench…but why?You will also need to unscrew anything you see with teflon tape on it, and thoroughly clean the threads, retape AND add a liquid thread sealant on top of that if you don’t want leaks from here back to China where this thing was made. Mine leaked oil like a family style bucket of Chicken from KFC.Lastly the press blocks are about useless on this thing. I went to the “other” popular auction site to get press blocks I could actually use.Overall this is a nice press if you have the time and ability to fix the things I listed.

Perfect! The first one I received was damaged so I reached out to the seller. He wasted no time in shipping out a replacement. I am super impressed by the way he handled it. Also with the product itself! If you’re looking for a hydraulic press, fast shipping and a super great seller, trust me, this is where you should purchase it! Thank you so very much for the extra lengths you went to to take care of this. You are a very good person.