Bicycle Combo Mount Adapter,Computer Bracket Camera Adapter for Garmin Edge 200 500 510 520 800 810 820 1000,Gopro Camera and Bryton Mount

As a Go-Pro mount it does the job (though I'm using it for a front light that uses the same fitting).Simple enough to install if the bolts are the right length, and it should be pretty durable.It would be nice if the larger bolt (holding the device to the mount) had a thumbscrew on it as well as an hex key socket to make the device easier to remove, but it's not a deal breaker.*** Garmin users - Be aware ***This isn't designed for the Garmin Flush out-front mount, so do check which one you have, but with the purchase of some 15mm M3 bolts ( https://www.amazon.co.uk/dp/B00SN3T15Q/ ) it works just fine.Really you probably need 14mm bolts rather than 15mm, so be very careful not to overtighten them or if they're raised above the thread they screw into on the Garmin mount they *will* damage the device in the top of the mount.Or just do what I did and file them down to 14mm then you can tighten them a little more.

You're looking at this because basically the GARMIN logic of a bracket design isnt helpful! You want to place a light or camera at the front of your bike but the design of the GARMIN out front bracket messes with your good plans.So bare with me.... the bolts received with his adapter is too short to screw Into the GARMIN bracket. M3 bolts or screws fit perfectly into the bracket but the length is an issue. 10mm are too sort. As pictured the 20mm are too long. Of you can find 15mm you'll be quids in!As pictured the 20mm fit but I've had to use washers to take up space. Using nail varnish to lock screws Into my adapter. Soon as I can find M3 x 15mm I'll swap them over for a better fit

Having tried a few different mounts for my GoPro this one wins hands down. I record my rides for use on Kinomap and this mount tucks the GoPro under my Garmin mount nicely. Solid fixing, no vibrations and perfect video quality even when going off-road. The supplied screws were too short for my Garmin Edge 530, I had to buy some nearly twice as long but worth it. Recommended.

So this is great! It comes with everything you need to covert your standard garmin mount to one that will take a GoPro mount.The only issue I found was that the bottom of the out front mount that came with my garmin was not flat. To solve this I used a file and flattened the bottom so this could mount flat.

Overall the product is well constructed but the screes are to long so much so I can't put my Garmin back on..shorter screws and it's spot on

Used it to mount my exposure light to a Giant Propel. The official mount made by Giant is out of stock (and double the price) so I measured it up and got this. Perfect fit!

If used on the correct Garmin out front mount it fits perfectly and no issue with screw length. Used to hold a GoPro on a 600-mile tour with no issues.Only slight criticism is that if you’re using the GoPro ‘bolt’ with finger grips, it doesn’t tighten completely. It’s just enough to stop the GoPro moving by itself but if you push it, the GoPro does move. Maybe the supplied bolt would be tighter but as that requires a screwdriver it’s a bit too faffy for something you want to take on and off regularly.Overall, did the job I wanted.

Good mount for under my garmin mount this means i can mount a bike light under my garmin when night cycling