Dimmable Under Cabinet Lighting with Motion Sensor, 24.6W, 1800 Lumens, White 2700K, 5-Bar Kit, 9", Warm

B&D has really thought out what a good under cabinet light system should be. This system is high quality and has the right components for most kitchen cab installations. The light quality is good and amazingly even across the counter space. The 9" lights are more than adequate ( I was worried a bit about this). It is easy to install for a simple in line arrangement, or for a split arrangement where the sensor is central, and the lights go in both directions from there. There are enough cables included to do many possible kitchen layouts, without having to buy additional parts.I installed mine with a split arrangement, and only had to drill about 4 holes to hide all the cable. It is possible to drill no holes and still hide the cable, but you will need to tuck excess cabling in every nook and cranny you can find. And if you go from cabinet to cabinet you will need to go under the cabinet walls rather than thru them. So placing the cable at the rear of the cabinet makes them less visible, but not completely hidden. If you decide to drill no holes, you will likely also have to put the power brick in a visible location.I like the operation of the system too. There is both a motion sensor and two available buttons to switch the system on/off. The buttons also control the brightness (by holding them down while the brightness cycles). By careful placement of the lights and sensor, you can have switches available on the right, left, and center of your kitchen. Pretty handy . The sensor only operates when your hand is within a couple of inches; I like this because it doesn't set the lights off every time you are working on the counter space below the lights, and it doesn't randomly turn the lights off when you want to leave them on. You have to deliberately move your hand near to the sensor to turn the lights on/off. So place your sensor where you won't be accidentally setting it off. If you don't want the sensor, you must still install it, but you can inactivate it by putting some tape over it.All in all, great system, at a great price. Recommended.

There is so many good things about this under cabinet lighting system! I purchased two sets of these lights and set out to add better lighting to our kitchen cabinets. The lights themselves have a sturdy aluminum housing and ultra-slim design.For my application – I used the plugin for the over the stove microwave oven to power these two lighting systems. By drilling holes through cabinets, I was able to install and power these lights without using valuable counter outlets, and, best of all, eliminate visible wirings along the counter backsplashes. Took a little time to complete this type of installation but well worth that extra effort!Quality, quality, quality – all lighting fixture and wire clips contains 3M adhesives that secured the lights and cables under the counter. Little screws are also provided the clips; however, I did not use the supplied screws because the 3M adhesives held everything firmly in place!We went with the warm white light kits – there are other color temperatures also available for this product. The motion sensor for these lights works great and there are 10 dimmable brightness levels to give the perfect glow to any space.These lights were installed without using tools except for a drill to run wires through the interior of the kitchen cabinets. The lights are so easy to install and truly added the “WOW” effect we were looking for in the kitchen. No more dark countertops during kitchen prep. Also, these lights automatically turn off after 3 hours if left on for extended periods. 5-Stars all around!

These soft-white LED lights are excellent. The kit was easily unpacked and contained more than enough adhesive tabs to get the whole thing installed. Also included are screws for a more permanent installation, thought this will take quite a bit more time. Be sure to thoroughly clean the bottom of the cabinets before trying to adhere anything to it. I was rushing to get it done and didn't clean, which meant I ruined a couple adhesive tabs. Otherwise it was an easy install. You will need to lay it all out and imagine where you want the light to fall, and then figure out what cable will go where and where the power source will be. There are 10 brightness increments which is probably the best feature. The light color is great and works great with our kitchen colors.There are only two minor problems. The first is that the motion sensor is super annoying and there is no way to turn it off. The lights would suddenly go off, and then back on while doing the dishes in the sink about a foot away from the sensor. At first I thought it was faulty but I placed some duct tape over the sensor and solved that problem. The second issue is that the transformer makes a humming noise when the lights are on. It's not terribly loud but in a quiet house you can hear it when standing nearby. These are not reasons to pass on this light system though. The price is a bit steep but they have thus far been well worth it for their quality and convenience.

These were easy to install and add much needed light in the kitchen. They are light weight and adhesive clips are strong so not worried about these falling. Wiring was relatively easy to hide. We used an outlet on one side of the kitchen and drilled to use the outlet above the microwave on the other side. The warm light is great and like the motion sensor so you don’t have to touch the light. Nice that there are adjustments to the light level too. Plan to get these for my mom too. Ratings looked good overall and we’d agree.