be quiet! Light Base 600 LX Black PC Case | Fully Windowed Front and Side Panel | Dual Chamber | ARGB LED Strip | 4 Light Wings LX 120mm PWM Fans | Inverted and Horizontal Layout Customizable | BGW67

Purchased the case without fans since I had plans to have all matching fans for this build. The case arrived in great shape ... Bequiet did great with providing plenty of protection for the case 👍. I had one small hiccup with one of the RGB headers that came with the case ... someone in production didn't give enough slack for one of the wires running from the RGB header and it pulled the connection off the header a little ... didn't break or compromise the performance of the lighting for the case. I even contacted Bequiet and explained the situation ... they didn't skip a beat with responding by sending me 4 extra RGB headers ( my kind of customer service!).The build quality of the case is SOLID. They also did a great job with the white paint for the case ... no missed spots and no imperfections 👍This case has plenty of room for cable management, its super easy to take part to get easy access for installation.I purchased AsianHorse PC Fans for this build...Half the price of Lian Li's pc fans and they provide great lighting and airflow!***The photos attached are from testing the RGB lighting for the case ... as well as making sure all the fan performed properly and there were no issues. **

Spacious interior with a slightly chunky build. The mesh back panel improves temperature control, and every opening is equipped with a dust screen. All case panels feature captive screws, so you’ll never lose them. Installation and cable management are straightforward, making it easy to build in. Overall, a solid and well-designed case.

I've always loved Be quite's products, they are very well made and great customer service!! I had the Silent Base 801 with the solid sound dampening pad on face that blocked like 95% on the airflow and then they came out with the next case that was the same as mine just a screened front. I called them and told them my system was running way too hot because of the front panel and asked if the new front panel on the new case would fit mine instead of buying a whole new case and how much it would cost. They gave it to me for free and just had me pay the shipping which was cheap!Anyways, about this new case, it's got screen EVERYWHERE and supports everything!! I have a MSI Z790 Godlike EATX in it which is a MASSIVE motherboard and it fits wonderfully in it. The fans look cool and live up to their name and the ARGB that runs around the case syncs perfectly to my Lian li controller.Now the downsides, one being kinda a design flaw and the other a victim of the case style. The design flaw, the bottom filter! To remove it to clean it if the case is in the normal vertical position, you have to tilt the entire computer towards it motherboard side, undue a screw in the bottom backside and then most of the bottom comes away with the feet and it's that that has the screen in it. Now let me point out that this is a heavy case and mix it with a heavy motherboard, GPU and everything else, you can't set the case back down to actually pull the screen out and clean it. I'm guess they want you to slide the whole case to the center of your desk then tip it completely on its back to get at the filter. I don't think it would have been too hard to have it slide out the front like the 801 and 802.The other problem being the victim of it's case style, no room to cable manage. Or not much room anyways. You won't ever get it looking clean unless your on a lot of meth and cut all your wires to length. Also not much room for adding extra controllers and stuff. I had to ziptie the Lian Li controller where the SSD's go and it's still a tight fit to close the panel.I kinda new all that before buying it and after looking at all the other cases that match this fishbowl style, this was the best looking and I'm not disappointed or regret the purchase in the least.P.S. Sorry for the long rant..........

Picked this up during Amazon Prime Days. This case seems like is a premium, quiet mid-tower with a clean design, good airflow, and solid materials. setup experience might not be so smooth, especially for first-time or occasional builders.The case itself is great: very sturdy construction, thick steel panels, quality Silent fans pre-installed, and plenty of room inside for a full-size GPU and 360mm AIO. I had issues with sliding the back vented panel off: it was very stuck to the point where I thought I’d need a pry bar (or return it for replacement) but eventually came off. I had no issues fitting an RTX 4080 and a front-mounted 360mm AIO cooler. Cable management is great with lots of room behind the motherboard tray, zip ties, and rubber grommets.Where it falls short is the documentation. The included manual is your typical Chinese pictograms; very basic. Not all cables are labeled, and there’s no clear diagram showing where everything is inside the case. If you’re a beginner, this could definitely slow you down or leave you guessing what goes where. A simple labeled diagram or cable map would have made a huge difference.SSDs are to be installed along the “door” of the back of the case. However, the provided screws will not work with the smaller holes of SSDs. With the rubber standoff grommets provided, no screws will work.The RGB lighting is minimal but tasteful — just a front strip with motherboard sync support or using the dedicated button on the front case controls. If you’re into subtle lighting, this fits the aesthetic perfectly. Airflow is solid out of the box, and with one extra fan for exhaust, temps stayed excellent while still whisper-quiet.Pros:• Very quiet, even under load• Nice build quality with a clean, minimal look• Spacious interior with great cable routing• DX ARGB fans included• Good airflow and support for large GPUs/AIOsCons:• Poor documentation and unlabeled cables• Not very beginner-friendly• Need to unstick the sliding back panel• Screws for SSD installation or improved mounting.Bottom Line:If you’re an experienced builder or willing to take your time, the 600 LX is a great case. It runs cool and quiet and looks premium without going over the top. But if you’re new to PC building, be prepared to do some trial-and-error or look up extra help online, because the instructions definitely leave something to be desired.