PC CASE ATX Gaming PC Cases ，Mid-Tower USB 3.0 with Double Tempered Glass Full View Computer Cases Black (Fans are not Included) (H6)

Metal is a little thin but not in an awful way. Matte finish scuffs easily but paint seems durable. Mine came with broken front glass and amazon got me a replacement case shipped out immediately. I built in the original and swapped out the front glass. The fans are quiet, nice and bright and move decent amount of air but all fans moving air out of the case was a problem. I turned the top fans over to create some type of intake. I did the top fans for aesthetic reasons. To keep the easily seen fan faces showing. Not the best setup for thermals, flipping bottom fans would have been better but would have looked worse. It works well and looks amazing. Gets a lot of attention.

Great case, I think it's better than the nzxt flow case.

Pros:Looks very nice.Comes with 9 fans.Fits ATX motherboards (barely)Airflow is good (if you switch all fans around)Cons:Cheap RGB fans.Cable management is a nightmare because of the limited space on the second chamber.All fans installed backwards.A bit bigger than the original design brand. Not a big issue but think you will need a bit of extra space on your table.No dust filter on the side (where the fans sit).Glass is a fingerprint magnet.Other thoughts:It is obviously a close design to a more expensive case, but overall, the look is great. The first thing that you will see is that all fans were installed backwards. So, I adjusted that quickly. Then my motherboard does fit, but the connectors at the bottom were very tight. I would recommend that loosen up the fans at the bottom first, then put all connectors, and then remount the fans. Tested IO at the front and it worked well.RGB fans are terrible. The do work, but you can tell that the brightness, led distance and light diffusion are not that good. In my case, my motherboard did not come with the 3-pin connector, so I had to use a controller. My air intakes are at the bottom and the side, and my exhausts are on top and back. Since I am using an AIO with 2 fans, I changed the 2 fans with the top 2 fans and moved the 3rd fan from the top to the back. So, airflow is good on the case. I wish it also had a dust filter on the side.So, overall, it is a nice case. Just be aware that you may have some extra work to address some of the issues. In my case, I was able to get everything working, and for less money than if i would have gotten the known brand case.

This is very nice case for the price have plenty of room, also love the fact it has 9 color fans, they are a little noisy, but really can't here them until you shutdown... Before you purchase this case pick this Case. You must purchase the caseShaking Tank ARGB and PWM Fan Hub Controller，9 Ports Case Fans Hub with Controller and SATA Power Input, Magnetic backplane Splitter 5V/3PIN RGB Case Fan Hub The case doesn't come with one!!!

Most notably, you’re probably going to have to take all the fans out and orient them properly, especially if you’re installing an AIO liquid cooler. They all came installed as exhaust! So dumb! So i installed the fans that came with my IOA in the top as the same orientation so you could avoid a bit of work if you just have a stock cooler/ air cooler. BUT EVERY OTHER FAN U WILL HAVE TO FLIP AROUND. If you leave them as is, you will have massive dust problems because with all fans exhausting, air will come in through openings without dust filters on them. 9 fans 3 sets of 3 is just dumb in the fist place if you have 2 sets intaking and 1 set exhausting theres going to be a lot of positive pressure. I recommend also installing a fan at the back for exhaust, I used one from the top that i replaced with my AIO fans. I literally had to take out every single fan and orient it properly. Just a nightmare and a lot of extra work.Also cable management is quite the endeavor with this many fans. And you probably dont even need this many fans so you’re waisting a bit of money on looks.Oh and one last thing, the case is a bit smaller that i thought it would be, was a little tricky getting a full size ATX mobo in there.

It's very pretty and the fans they use have multiple settings that I enjoy playing with. This is the first PC I've ever put together so be easy on my cable management 🤣 all in all it was a positive experience putting this thing together does feel a little cheap but it is a cheap case the magnets could be stronger but it's a cheap case the metal could be thicker but it's a cheap case I could cry and complain all I want but I got exactly what I paid for and then some. I bought nine fans and I got a computer case for free. It doesn't have any fan filters though so I will have to buy those. When I upgraded my graphics card in my last case I was overheating this one seems to have damn good airflow. all in all would buy again