G-Color Screen Protector for Galaxy S10, [Full Adhesive] [Case Friendly] [3D Curved Fit] Tempered Glass Screen Protector [ UV Apply] for Samsung Galaxy S10

This is my 2nd G-color protector, the first one lasted approx 1.5 years as I drop my phone A LOT. I decided to buy it again as this is by far the best protector I had for Galaxy S10 or even for any phone. I have to say I was sceptical at first as other protectors would normally survive a few months at best. The process of installation, was easy to follow thanks to the tutorial video. Quite a bit of prep work but it's worth it. No bubbles, the touch screen works perfectly. With my first G-Color the finger print reader didn't work well but with the second one it works perfectly. With each fall the protector did a great job protecting my phone screen and the tempered glass on the protector itself didn't develop cracks as much, which allowed me to keep it on for so long. Taking off the protector is very easy and I was pleased to see no scratches or marks were present on my screen phone. Couldn't recommend this enough.

It's messy to install, but cleans up nicely. Here are my tips to keep in mind:* Mine did not come with gloves. Get some. The liquid comes out the side as you clean it up, and gets all over your hands.* Bubbles can be gently pushed out to the side, but be very, very gentle (can't stress that enough - touch the screen with feather-light pressure before it is cured. You want to work the bubbles out, but don't want to squeeze too much of the glue out while it is still liquid.* One of the strips used to cover the holes has a tab on it. It's not obvious, but the tab covers the headset speaker. The speaker is a tiny grill at the top of the screen, and easy to overlook.* Don't forget to clean the front camera hole with the alcohol wipes when you clean the sides and back.* The UV light timings are important (3 mins + 5 mins). The UV light hardens the gel, it does not "activate" the hardening like epoxy resin. So if it does not get enough UV, then it will stay liquid. I noticed this on some spilled on the work surface.* When cleaning up, I found there was so much gel that came out from under the protector, that it was better to clean up the majority with tissue paper first, then use the alcohol wipes to just tape off the final film. If you don't, you end up just smudging the gel around with the wipes, and not actually cleaning it up.* If miss a few tiny bubbles, don't worry. They will always be there, but are hardly noticable. You will probably make it worse if you try to get them out once you start with the UV.I hope that helps. That is just my observations having put the protector on, and are things that were not obvious to me from the videos.

In theory this is a great concept however unless you have done this a million times before i cant recommend this screensaver, the lady in the video made it look easy to apply and im sure it is for an experienced person it would be, however i do have to question how many phone she ruined in the proccess or how many dimmy modles of the phone she praticed on before making the video, unfortunatly this is a VERY messy product and the glue gets everywhere the pads it comes with DO NOT protect the buttons at all and it took me a whole day of continuous wiping after using the UV light supplied to make sure it did not stick my buttons together or damage the button functions because the glue got inside.

Everything you need is provided in the box, they've thought it through well and it's a good price. The video tutorial is clear and thorough. The installation procedure is fiddly and long winded and it's a bit daunting putting nasty liquid glue all over your expensive phone! However I got good results with no bubbles and a clean fit.The glue solution ran onto the edges of my phone and solidified into a rubbery substance which took a while to remove. The cleaning wipes provided help with this but you may have to scrape with your nails, too.After installation the screen works fine but the fingerprint reader is definitely more temperamental, this is after I've registered my prints again as instructed by the manufacturer. It works, but not quite so reliably as before.I knocked off a star as the product description is misleading. This product is not made of glass, it's plastic. Presumably the mention of tempered glass in the description is referring to the phone screen itself. I was a bit disappointed to discover this. Ultimately the real test is when you drop your phone which I've thankfully not done yet! The plastic seems robust and will definitely prevent scratches, but I'm dubious as to whether it would stop a screen crack following a nasty drop.

Whilst I have to agree that the protector does not cover the whole screen and there are gaps, I think this is normal and to be expected on curved screen protectors. Fingerprint sensor had to be reset but it works like a charm. Even better than with the flimsy protector I had before. Touch sensitivity is just as before I had the screen protector on. It was very easy to install and the finish is excellent. I had some of the liquid going on the border of the phone but came off quite easily.Make sure you install it on a comfortable place and you don't drop it. I didn't and the protector cracked next to the camera, but once the liquid to fix it to the screen set the crack became almost invisible. I would strongly suggest to use nitrile gloves when installing it, even if you are not allergic to the liquid.All in all I'd buy it again, and probably will, since I cracked this one...

So I watched the installation video twice and had it running whilst. It was really easy to follow and I feel it should have worked perfectly. However despite following it to the letter I still have a small airbubble trapped in the centre of my screen and could find no way to clear it - some guidance on what to do in this situation would have been helpful. Other than that it looks great everywhere else. Touchscreen works flawlessly but I can't get the fingerprint reader to either pick up my existing fingerprints or store a new one which is disappointing. I will say it looks better on the phone than traditional screen protectors that I've tried to use and end up discarding immediately, but I don't think it'll be long before I decide to discard this one as well.

Funkar bra viktigt att ytan mobilen ligger på är vågrät allt blev bra för mig och finger avtrycket funkar perfekt sen har jag sett att man kan ta av den om t,e,x spricker bra försäkring för skärmen tycker jag. levereransen kom 2 dagar tidigare än utlovat.

Good screenprotector only bad thing with it is that it doesn't cover the whole screen but with a case it doesn't matter