250A 110/220V Stick Welder,ARC/Lift TIG Welding Machine with Synergic Control,IGBT Inverter,Hot Start,Arc Force and Anti-Stick

Great welder, I can burn 1/8” 6010 and 7/32” 7018. The problem I have isn’t the welder it’s me figuring out the best settings for the amps and hot start and arc force. What are the best settings for 6010 and 7018 on this welder . Because I’m either burning way too hott or it will not burn . Running on 220v

I’m impressed. This does a good enough job for me. Best on 230volt, doesn’t cycle off as much.The range adjustment is good

Really surprised me,a little arc welding machine,so powerful for the size,and price,I really recomend.

Been using it for months and been very careful using it.made my own cables ground and electrode especially connector adapter for it to use 240 and picking off of the floor dirt and dust

I was surprised at the power of this little welder. I tried a 3/32 electrode and this welder can easily handle a 1/8 electrode. Easy start ups and no loss of voltage. One electrode after another, no issue.

The welder is very easy to use. I had my 13 year old learn to lay a straight bead. It does stick little but once you get it going it's nice on 110v. It kept tripping 15a breaker so I tested the amp draw at work with an amp clamp. It peaks at 23 amp and drops down to 5 with a 3/32 rod. I have not tried it on 220v. So I'm going to run a dedicated 25a line to run this welder at home for small projects.

This is a neat little welder. Probably doesn’t actually reach 250 amps as claimed, but I was able to burn some welds into 1/4 inch plate I used on my trailer for a winch plate really well on about 200 (220v). The cables do feel cheap but it’s $84 what do you expect, they work. I ran straight through about 8 rods and it never overheated. My rods don’t stick as bad as my buzz box when starting, so I assume the hot start works as it should. I won’t be dragging out the buzz box anymore, not when this little lunch box welder performs like that.If you’re looking for a miller quality welder for $84 this isn’t it. If you weld 50 hours a week this isn’t for you. But if you need a cheap welder that does a pretty dang good job and burns hot, this is the one for you.

Handy little welder for quick arc welding.