Mount-It!MI-203 Low Profile Fixed TV Wall Mount | Fits 13-32 Inch Screens | VESA 75x75 & 100x100 | Heavy-Duty Steel with 60 Lbs Capacity | Built-in Bubble Level | Ideal for RV, Home, and Office

I used it to mount a 20” monitor near my networking equipment in the basement. Easy to install and feels very secure. I wouldn’t use this for a larger TV in a family room, but for the price and my application, it’s perfect. One nice feature: the screws that lock the monitor or TV to the wall portion of the mount can be used for minor leveling if needed.

This works well and is easy install. All needed installation hardware is included. This is really designed for Tv's or monitors that have the wires coming out of the bottom. It's very close to the wall so wiring coming straight out of the back might not work.

This mount fits close to the wall, is very sturdy and extremely well-made. But the included plastic anchors are so big that the provided screws don't grab any threads. In fact, you'll have to get a screw so big to fit the anchor that it won't actually be able to pass through the holes in the mount! You won't find this out until it is too late; the anchors don't want to remove from the wall without a lot of damage or as I did, you can just give up and make two new holes with better anchors. If you can drill into a stud, you won't have this problem and then the mount is perfect!

This little mount works very well. The two halves separate - one attaches to the monitor that was equipped with 100x100 mm VESA mounting plate. After that, you simply position the monitor slightly above and in front of the plate, push it in and let it drop down to its mounting position. Two screws on the top (I needed a long philips head screwdriver to reach them since the monitor is quite near the wall) secure the top half to the bottom half.

It keeps the (in my case) the monitor close to the wall and is easy to install to wall. The design for attaching the monitor to the part mounted to the wall is a great design. However, be aware that because it is so tight to the walls you have to plan well for cabling.I liked it enough that I bought a second one.

Overall, it works, and I'm happy, but the design could be improved. I used this to wall mount the main monitor at the center of my home music studio.First of all, the level fell out when trying to place the wall plate, so (no biggie) I had to use my combination square. Second, those "mating screws" that tie the two plates together are impossible to access the way my monitor is shaped. So I have that "akilter" situation others have mentioned. I think some better engineering would be of value for those issues.Third, there seems to be no option for drywall mounting - only 2 mounting holes. Mine had parts and instructions for stud or concrete mounting. I get that if you are mounting a huge TV. For a monitor :: not only are most modern monitors super light, but you can't always find a stud (nor is there concrete) anywhere near center of where your keyboard is placed. So the wall plate needs 4 holes on the outer perimeter to be used with drywall anchors.

• I used this on a 27" Acer CB272. The setup was straightforward until I started getting the brackets on the wall.• Use your own wall anchor if you can. The anchors are cheap and the top anchor just spun with the screw. I had to hold it with a pair of needle nose pliers while I got the screw most of the way in. After I got it seated, the anchor was slide out of the wall by about a quarter inch. That meant the monitor was aiming down towards the desk.• To fix this I had to use some small washers and sheetrock screws to hold the wall bracket tight to the wall.• Then the issue with the design...even with the mount tight to the wall, when you put the monitor on it, it sags down towards the desk. The only way to stop that is to put in the two screws that hold the monitor mount to the wall mount. Unfortunately, at least with my monitor, that is nearly impossible to reach. A screwdriver handle pushes the angle too far to drop the screw into place with a driver. I tried lowering the monitor into place with the screws already in, and no go. I finally had to use a piece of tape to lower a longer screw into place, and tighten it enough to hold the monitor in place. What should have taken about ten minutes took almost two hours.The end result was what I wanted, but for all the options out there, you might keep looking to find one that doesn't have these issues.

We needed a compact mount for a small Fire TV we are using for a family calendar display. Since it has a 100x100 VESA mounting pattern, this was perfect. It's very easy to assemble and mount to the wall, and included all the needed hardware to attach our 24" Fire TV to it. Built in level was a nice touch as well, and accurate after checking it with my usual level.