Hourleey Sewer Jetter Kit for Pressure Washer, 1/4 Inch NPT, 100 Ft Drain Cleaning Hose, Orifice 4.0 Button Nose and Rotating Sewer Jetting Nozzle, 4000 PSI

I’m very pleased with this kit. I have had issues with my sewer since I moved in, the house even came with a drum auger. I have original 100 year old iron pipes under my basement that roots wreck havoc on. I woke up this morning to water in the basement from the shower, got out the old auger and got it pushed through enough to flow again but kept hitting a hard stopping point. I ordered this kit same day shipping, got it in the evening and hooked it up to a 120V harbor freight 1750psi pressure washer.Gave it a test fire and it puts out some pressure through these nozzles. Fed the solid bit through, kept hitting tough spots but after about 10 minutes of feeding back and forth I got through the entirety of my basement to the clean out outside. Pulling it back through had barely any resistance, so I changed to the rotating tip and that thing is killer. It fed itself the entire way almost, I ran it through a couple times to be thorough and now I’m safely betting my sewer is cleared out.Now that I have this kit I’m going to try to keep on top of it every couple months, it’s a lot easier than hauling that drum auger around and fighting it.

So, I have about 100’ of sewer line before it hits the main, and this thing is a lifesaver. Part of my line had collapsed and, and further down the line had gotten plugged up with mud and roots and who know what else…. So I spliced in a small section of new pipe to repair the damaged section, and spent about 3 hours with a big drain auger that I rented. It finally started flowing, but I could tell the auger was just pushing it’s way through the mud and stirring it up, vs completely flushing it out. So I decided to give this product a try. I just used it on an ordinary 120v pressure washer. I’m sure it would have been quicker on a gas unit. But, after about 30 minutes of feeding it in and out, it finally got the line clear enough that it would suck in all 100’ or hose with ease. I ran it back and forth a few more times and now it’s back to flowing 100%!I’m probably gonna make this a maintenance job, once a year or so. As I have and old Orangeberg sewer line, and it needs all the help it can get to keep flowing. But I’m confident that flushing it out now and then with this, will be a lot safer and less likely to damage the pipe than having to rent another big auger

Got this all hooked up a few weekends ago, but it was pretty cold outside. I couldn’t get the jet to make the bend I needed, but I think it will be easier in the spring when it’s warmer. Seemed to have plenty of power. I got my drain running with other tools, but can’t wait to use this to give it a thorough cleaning once it’s warmer outside.

I purchased this product to clear a waste line in a house. Since there was no good entry point to get a drain cleaner auger in the line through the house, the whole line was full and it would make a big mess inside, so I went through the septic. I was concerned that I wouldn't make it past the clean outs, but I was able to get this jetter all the way through to the clog and then some. 4 turns, 2 were clean outs. Approximately 40' of 3" waste line. I consider it lucky that I got so far, but I got it done and the waste line is clean now. One issue I had, but it was probably my fault; is that the first nozzle got clogged with debris from what I think was from my pressure washer. TIP- Flush your line before you install the jetter nozzle.

Got for my husband because he had seen it somewhere and he LOVES it! We have recommend it to several friends

Works great

I really like this little drain Jetter, it's not a professional machine but it works great for simple jobs, it's good to know I have

Works well