Auxbeam 4 Inch LED Fog Lights DOT Approved for Jeep Wrangler JK Rubicon Unlimited JKU 2007-2018, 60W Driving Offroad 4" Round Fog Lamps w/DRL & Amber Turn Signal Lights

As with all of the other auxbeam products these do not disappoint. They’re super bright and bolt into the barricade extreme HD bumper with ease.

goes perfect with the halo switch back headlights. Very bright and easy to install

Installed these on a bumper I bought for 05 4 runner. Fit perfectly and easy to install. Haven’t had any issues after a few months. If you had halogens headlights beforehand you may have to install a load resister or replace flasher relay so that it does not blink to quickly on turn signal.

As the title states, I wish the turn signal color was more on the orange side. To me its almost a peach color, which is just "not it". Since this product wasn't intended for my use, I am not going to complain about it not fitting, I wanted to use this on a 2012 Dodge Charger SE (3.6L). I like the features this has but the bracket doesn't line up completely, for example only 3 out of 4 tabs actually have places to mount to, the bumper on my car also has some plastic guide pins for this to seat on, I had to trim two of them to make them slightly smaller but the plastic is soft and very easily cut with a utility knife. I also had to drill out the holes on the lights to be slightly larger but that is my fault, I did not have factory lights and so I did not have any hardware to work with and picked up heavier duty stainless bolts to mount this, I could've picked some smaller ones and not needed to drill out the holes larger. Blue wire is for the white DRL and the yellow wire is for the amber turn signal feature. Then a standard red for positive and black for negative. I plan to wire the positive to a toggle switch, the blue wire will connect to my aftermarket headlight DRL and the yellow for each light will wire to my turn signal wires to function as additional indicators. I mainly got these for the clean cut off that they provide, I think they could stand to be brighter as well but they have the look I was going for. Overall a decent light if it fits your needs.

I like how bright these are, and the turn signal is easily seen. Overall very happy. Auxbeam is an excellent company for budget friendly lights and these do not disappoint.

I have not hooked up the turn signal feature yet but just the sheer brightness of the fog lights are impressive. Nice cutoff that won't blind oncoming traffic, high quality build, and fit nicely. In the second photo is an auxbeam psx24 in the passenger side vs the aftermarket in the driver. Much more focused and brighter than the factory fog lights

Puedo poner mis luces del color que quiera me encanta

These are a great deal if you don't want to spend many times the price of the JW Speaker version, but be aware of the drawbacks: - Adjustment screw does not line up to hole in bumper cover like the stock fog lights. The screw is on the opposite side (I'm guessing they flipped the model in their CAD software), so you either have to cut a new hole or remove the light to adjust it. - Harness is NOT plug and play, at least on a 2015 JKU Sport. Had to buy a H16 male socket to 9006 HB3 female adapter. The brand I used was "HUIQIAODS"; cheap but worked fine. Keep in mind the connection is polarized and the H16 can fit even if reversed (so if it doesn't work the first time, unplug, flip, replug). - Prepare to do some light wiring if you want the DRL's or Turn Signal halos. The wire connectors are basic spade connectors. I did not connect mine but if I do in the future I will likely cut, solder, and heatshrink a longer wire instead of using a spade connector. - Who knows what the longevity will be; they're cheap. Aside from these inconveniences: + The lights are very bright. + Beam pattern is acceptable for the price. + Nice to be able to have DRL's or Amber Signals if you want. + Look way better than stock fogs. + Install is pretty simple if you have tools.

It works great, previously has led fog lights that worked good too however dirt got in and moisture got in. I put silicon on the harness going into the light to prevent this, I've done this to my tail lights and over 2 years many snow and rain storms in no issues. Only challenge is finding ways to neatly tuck that wire for the halos in. I put a piece of Clear PPF film to help with the stone chips, so far so good would recommend. They loo great with my headlights too!

Buena luz, buena calidad, buen producto

Buena calidad y buena iluminación ya tengo varios meses con las luces y aun sigue funcionando al 100

They work well, look good, and do what they're supposed to do.

Couldn't get the proper adapters for the factory connectors so I just hard wired them in and they're great.