I.C. ESD Safe Flux Dispensers, Static Dissipating with Stainless Steel Needle Tip, Leak-Proof, Corrosion-Resistant, Recyclable, 26G Needle, Translucent for Easy Monitoring (FD-1-ESD)
Thumbnail 1

I.C. ESD Safe Flux Dispensers, Static Dissipating with Stainless Steel Needle Tip, Leak-Proof, Corrosion-Resistant, Recyclable, 26G Needle, Translucent for Easy Monitoring (FD-1-ESD)

3.5/5
Product ID: 23472615
Secure Transaction
Frequently Bought Together

Description

  • Antistatic ESD Safe, static dissipative 2oz. flux bottle with needle dispenser or pen. Luer/needle Gauge sizes available 16, 20, 27 Bottle has an average surface resistivity of 10 raise to power 9 to 10 raise to power 10 ohm per square and will dissipate a static charge of +/- 5000V in less than two seconds Use in areas where a static charge can cause harm

I.C. ESD Safe Flux Dispensers, Static Dissipating with Stainless Steel Needle Tip, Leak-Proof, Corrosion-Resistant, Recyclable, 26G Needle, Translucent for Easy Monitoring (FD-1-ESD)

Reviews

3.5

All from verified purchases

C**E

Good product with a thin #26 needle. Accepts also thicker needles.

This FD-1 product has the narrower needle (26 guage) in this product line. I am using liquid rosin flux and SMD parts and am very happy with the level of control that the thin needle provide. Since this is a standard straight blunt needle, replacing it with new/clean or different guage should be easy (both slip and luer lock needles should fit, for lower guage numbers you may need to increase the plastic tip hole size but this should be trivial).If the needle gets clogs, either heat it with the solder iron to soften the clogged flux or replace with a new needle, they are cheap.I am also uploading here a picture with the parts that comes with this product. Assembly is easy.

Y**6

Fair quality and last a while.

I use these for IPA and they hold up fairly well. Eventually the top splits a little or I bend the needle and I have to replace it. Otherwise they seem to be pretty good quality. I have only had one new one that was a bit leaky out of the box.

D**E

The needle is shipped inside the bottle

I nearly returned this needle dispenser bottle because the needle seemed to be missing when it arrived. It was inside of the bottle (I assume to protect it during shipping). I'm using the bottle to dispense cyanoacrylate (super) glue accelerator and it works very well for that. I have no idea of the antistatic properties of the bottle, but it works perfectly for my needs. This bottle is better quality than others that I've used for dispensing accelerator.

T**N

Not so good for RA Flux

The product is nice but I am using it with RA type soldering flux and it doesn't like it. RA flux thickens when it dries so not so good for the tip. That said it would work well with other types that do not thicken.

A**R

This package they send is like a puzzle

This package they send is like a puzzle! There are 2 totally unrelated objects-a bottle and a needle. The needle was never created for this bottle. They are not made for each other. The needle does not fit through the hole and insert into the bottle and the the needle does not fit over the end of the bottle. There is no way for this needle to connect and stay attached to the bottle. There are no instructions. Your "Mission Impossible"will be to guess how to attach the needle without oil leaking and dripping on your hands-A MESS! I found the 'real deal' best idea for an alternative. Go to (type exactly Amazon): Momuk 12pack 10ml syringes the 18ga Blunt Tip. These do not deteriorate and perfect to insert needle into the key slot of a lock for oiling.

A**.

Buy a different bottle !

HORRIBLE ! It didn't come with the needle tip as shown in the photos. And the price ? I was willing to pay the approximately $13 for this little 2 oz. bottle because it was SUPPOSED to have the needle tip, even though the price is ridiculous.

M**C

My favorite flux applicator.

This bottle helps keep the flux clean, controls the amount of flux you use and the flux doesn't spill out if you tip the bottle over.

J**N

Nice little bottle for flux

Nice little bottle for flux. It doesn't come with a cap but I made my own out of stripped wire jacket.

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Rajesh P.

Customer service was outstanding when I had questions about the product.

2 days ago

Yusuf A.

Fantastic experience overall. Will recommend to friends and family.

1 month ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving over 300 million shoppers across more than 200 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.
174.45 DT

Duties & taxes incl.

Tunisiastore
1
Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Rajesh P.

Customer service was outstanding when I had questions about the product.

2 days ago

Anita G.

Good experience, but the tracking updates could be better.

2 months ago

I C Esd Safe Flux Dispensers Static Dissipating With Stainless | Desertcart Tunisia