CHAMBERLAINClicker Keyless Entry KLIK2U-P2, Works with Chamberlain, LiftMaster, Craftsman, Genie and More, Security +2.0 Compatible Garage Door Opener Keypad, White

Works great with my new garage door opener. Easy to program.Only drawback is that the "door" slides up (rather than flips up on a hinge like my old one), so it had to be installed on the trim instead of the siding, because the door hits the siding overlap and it can't open enough to get to all of the keypad.

Works Great! Easy to program, just follow simple instructions, heavy built, heavy duty cover slides up

When I ordered this keypad, I was not sure it would work with my garage door opener. I have a Stanley 3200 "Residential Door Operator". I'm not sure when the device was made, but I'd bet it's the original that my house was built with 25 years ago.The item arrived on-time in a normal brown shipping box. Inside the box was Amazon's normal plastic balloons for cushioning and the keypad in its retail box, which is a clamshell (you'll need scissors to open it). Inside the clamshell was the keypad, instructions, and 2 screws for mounting the keypad. The battery (9v) was already installed in the keypad.Instructions/Compatibility:At first glance, the instructions look complicated, but upon looking closer, I could see that there were actually 4 sets of instructions for 4 different types of garage door openers. The following have instructions provided:Garage door openers with:- 3-position DIP switches (Chamberlain, Sears Craftsman, LiftMaster, Master Mechanic, and Do It brands)(do a search on Amazon or Google Images for "dip switch" if you are not familiar with the term)- 2-position DIP switches (Genie, Linear, Stanley, and Moore-O-Matic brands)- Yellow, white or grey Smart/Learn buttons (Chamberlain, Sears Craftsman, LiftMaster, Master Mechanic, and Do It brands)- Smart/Learn buttons (Chamberlain, Sears Craftsman, LiftMaster, master Mechanic, Do It, Genia Intellicode, Overhead Door, Stanley, Wayne Dalton, or Linear brands) -- Note that these instructions say to visit www.clickerproducts.com for Genie Intellicode II instructions.Set-up was a breeze.. for me, I just had to look at the configuration of DIP switches on the door opener or on the remote control that I already had programmed. I selected a 4-digit code (note that this device only allows 4-digit codes, it does not support shorter or longer codes), found my opener ID in the instructions (by brand, not model), wrote down my DIP switch configuration, and then programmed the keypad with all of that information. The instructions serve as something of a work-sheet that makes this process real easy.When I was done programming the keypad, I went outside and tested it, but it did not work. At the end of the instructions, there is a note about what to do if the keypad does not work:"If opener does not function, flip DIP switches, so if a switch is "on" or "up" flip it "off" or "down" in step 3.Basically, all this meant was during programming, if you entered a 1, change it to a 2, and if you entered a 2, change it to a 1.So, I quickly re-programmed the keypad (less than 30 seconds), went back outside and tested it. Worked perfectly to open and close the garage door.Then I followed the instructions to mount the keypad. I removed the cover, battery faceplate (1 screw) and the battery. I put each of the 2 screws in the mounting holes and drove them into the wood next to my garage door. Note that if you have a material other than wood, you may need to drill guide holes first - I did not have to. Then I replaced the battery, the battery faceplate, and the cover, and I was done.In all, I think the process took about 15 minutes, and that was only because I to go inside and outside a few times to get the garage door opener, drill, and test the keypad twice.Of course, I cannot speak to the reliability of this device over time, since it was just installed, but so far, it's great.

The remote keypad works well and it is easy to install. However, after installation and pairing it up with the garage door opener, the door would open or close after pressing a single button, any button. I had this happen with the first unit I bought and worked with Chamberlain’s chatbot to troubleshoot. I got nowhere with that and returned that unit. I ordered a second one because my old keypad was the same model and worked for years. The second unit did the same thing - opened the garage with a single digit. Before returning the second unit I went to Chamberlain’s site again and found the FAQs. One of the first questions was about this very problem. The answer was that this would happen when pressing a button shortly after entering the code once, such as when pairing with the opener. If you press a button before the back lights turn off it will open or close the door. They should mention this in the manual.

very easy install and programmingtook less than 10minworks great !

Easy to install and program!

I have an old Sears Craftsman garage door opener (GDO). So old, that it uses dip switches -- it doesn't have one of those "learn" buttons that you use to link it to a GDO keypad. I bought this KLIK2U-P2 because it claims to be "universal", and also claims that it works with these old dip-switch openers. When it arrived, the lettering on the box said KLIK2U-P2, but a sticker added to the side of the box indicated KLIK2U-P2MC. Turns out that the "MC" is a recent release, which allows the user to change the frequency of the emitted signal.The included instructions all referred to a learn button. However, the instructions also stated that it would work with a dip switch type of opener, and they provided a link to a pdf file (114A5072.pdf) on the Chamberlain web site. So, I entered the link into a browser - took me to the Chamberlain site - but the page stated 404, file not found. I checked VERY carefully to ensure that I had typed the (long) link correctly - and I had (if you doubt me, read on).So, I Googled, and found an older user manual for the KLIK2U-P2. That manual included detailed instructions about how to program it to work with old, dip switch, GDOs. I followed the instructions very carefully. Most importantly, when you are programming the keypad, you have to enter the ID number of your GDO (so the keypad will know what kind of signal it needs to send, to activate the GDO). For my old GDO, that ID number was 11 (note, that has 2 digits). It didn't work. I tried several times, no joy. I did notice two things. First, when programming the keypad, after entering the ID code (11) followed by the pound sign, the lights on the keypad started flashing like crazy - it looked to me like an error signal - the keypad was telling me that I had done something wrong. Second, after I had (supposedly) completed the programming, and tried to activate the GDO, the keypad lit up, but that was all. The GDO did nothing at all.So, just for the hell of it, I decided to try some of the GDO ID codes listed in the instructions that came with the keypad. They listed 9 different GDO IDs, covering a bunch of different types of GDO. Note that those codes were 1 through 9 - all single-digit. When I tried those, I immediately noticed two things. First, during programming, when I entered a single-digit ID code followed by the pound sign, the keypad did NOT start flashing like crazy. Second, after I had completed the programming, and tried to activate the GDO by entering my PIN, the keypad lights blinked very rapidly for about 5 seconds - as if it were sending a signal to the GDO. My GDO didn't activate (presumably because it didn't recognize the signal), but I think that - unlike when I used a 2-digit ID code - the keypad had accepted the programming.So now I called Chamberlain tech support. The person there told me her instructions for the keypad didn't say anything about dip switches, and didn't contain any link to a pdf file. So I emailed her a photo of the instructions that I had received with the keypad, and she confirmed that the link took her to the chamberlain 404 page. So, without any doubt, the instructions that came with the keypad are WRONG. She then googled, and found the same older manual that I had found. We went through the programming several times. No joy. Although she was pleasant, she clearly didn't understand how these things work. First, she got the dip switch instructions wrong (I had to correct her). Then, when I told her that I was calling her from inside my house, she INSISTED that you had to be in the garage when you programmed the keypad to work with dip switches. I told her that, before calling Chamberlain, I had tried to program the keypad several times, some of which were in the garage. And I explained that you had to program the keypad in the garage ONLY if you're using a learn button on the GDO because, in that case, when you press the learn button, the GDO sends a signal that the keypad can detect - so yes, in that case the keypad has to be close by. However, when you're trying to set up the keypad up to work with a dip switch GDO, you do NOT need to be nearby when programming it, because all you are doing is telling the keypad what signal to transmit (obviously, you need to be in range in order to use it!). I told her about the difference in keypad behavior when I used a 1-digit ID code. She refused to even consider the possibility that the keypad would not accept a 2-digit GDO ID code. She kept telling me that the old instructions said that I should use an ID code of 11. I told her that I knew that, and that I'd tried using that code about 3 hours ago, and had used it several times during our 30-minute phone call, and IT DIDN'T WORK.Bottom line is that, as of Jan 2023, the KLIK2U-P2MC does not work with old, "non-learn", dip-switch-only GDOs. I've returned it, and have ordered a different "universal" keypad that - like the KLIK2U-P2 - claims to work with dip switch GDOs. Let's hope that that one works.