Magnetic Levitation Module DIY Core Kit with LED Lamp Max Load-Bearing 500g Platform for Magnetic Levitation Machine

The media could not be loaded. This was an incredibly good little device and I'm having to restrain myself from buying like 5 more and making all sorts of random decorative floating objectsThe magnetic levitation is quite stable inside the sweet spot and surprisingly strong, it's quite hard to get aligned at first but after messing with it for a while I can do it by feel alone really easily. It kinda tugs into place when it's right and I just go by that.It supports around a pound, the balance has been the limiting factor more than the weight with what I've done with it so far.It includes an automatic temperature cutoff which is nice because the coils can draw a fair bit of power, and depending on your enclosure it may not radiate heat well enough.Be REALLY careful with the magnets, don't play with this without something in between the large grey donut magnet and the levitating platform, as if it gets out of the stable part of the field it will violently flip over and slam into the ring and damage it. Also, don't store the levitating magnet next to the large ring magnet, it can affect the magnetisation long term and then the levitation simply won't work.

The media could not be loaded. Have purchased 4 of these with more to come, and have been very happy with how they work. I embed them in wood spheres I turn and hollow, and they levitate very well.

Like the title says, strong magnet. Worked great at first. Get a strong case for the base ASAP otherwise the neodymium magnet will break the magnet in the base. One of the sides eventually became weaker than the others and it's hard to balance now.

The media could not be loaded. Unlike the magnetic levitation devices of the past, this one is extremely easy to achieve balance with, and the floating effect is far more dramatic than with overhead levitators.I use mine to make a 3D printed model float, and it looks unbelievably cool. For a couple months now, my module has operated flawlessly without issue.Be sure that you NEVER allow the floating magnet near the module without some sort of soft protection in between, like a big piece of foam or cardboard. Otherwise you'll crack the magnet(s) and end up with a paperweight!

This thing has been floating my Bob Lazar ufo model for months and them has been very low. No complaints here, power went out one night and that thing scared me pretty good by slamming into the base lol.

I've tried EVERYTHING to get the magnet to float, but it won't.

I was constructing a project to use this on. My tests of it went well, it worked as advertised. Then, when picking up the disk magnet assembly, the smaller disc came lose. It appeared to have been shoddily glued onto the larger upper disc. When I tried to grab it to glue it back on, the snapped out of my hand and shattered into multiple pieces. If you're going to use a two piece magnet, you really need to attach them properly. And, of course, there appears to be no extra magnets available, so now I have to return the whole thing.

It has 4 sets of LEDs that help indicate if the magnet is off-center before you let go of it while getting the magnet to hover. It's worked amazingly well for me, though my roommate's gotten her finger's pinched once or twice while trying to get the magnet to float. I've been impressed by how well it works.