TEKTON 3/8 Inch Drive 12-Point Impact Socket Set, 12-Piece (5/16-1 in.) | 47911

Continue to be pleasantly surprised by tekton. This a nice set. I needed a 8mm 12pt 3/8th drive and that was not easy to find locally. Realized I did t have any 12pt so I bought this set to have on hand next time the need arises. Don’t know if I’d trust this brand for my heavier use tools, but for one off and less frequently used tools and sizes they seem pretty good and the price is right. I also have their 3/8” and 1/2” torque wrench which work great and seem accurate when compared to other torque wrenches, torque sticks, digital torque gauges, etc. anyway, I’m impressed and will keep giving this brand a try until I have a reason not to.

I have used these sockets to fix the tie-rod bearing, which involved removing the oil pan, the oil pump in order to get to the piston rod, most of the bolts were 12 point bolts, which is why I got these sockets. The sockets were clear to read (although I hope the etching will not wear off) and fit well on the sockets and extensions. The container has marking on it so it is easy to identify the socket. 1mm increments is a welcome thing so you will have not gaps in your socket arsenal.Would definitely recommend

Love, Love, Love Tekton impact sockets! I bought my first set a few years ago, just 1/2" metric deep to use with my new impact gun... you know what? It's all I ever used... loved and coveted my $25 impact set. Kept them in their case, kept them clean, put them back when I was done using them... need came up to buy a chrome 1/4" set.. looked no further than tekton... loved it. Need for a 3/8" chrome set... bought tekton. Looked at all my 3/8" and 1/2" random craftsman sockets and said "Merry Christmas" and bought them all new metric, SAE, 1/2", 3/8" deep and shallow. On average about $25 a set, not bad at all... I have never broken one, only mushroomed a 18mm using it as a insert to hammer out a U joint (my bad).

I hate using 12 point sockets on any bolts nowadays but since I work on older duramaxes alot I needed a 12point set as they use a ton of different sized 12point bolts. Be in mind these are very very tight exhaust bolts and head bolts. I've used 3/8 drive 15 and 17mm the most and have yet to break one and I've put over 200ft lbs on the 15mm. I normally use these on a Milwaukee mid torque 600ft lb impact wrench.

Tekton is starting to be my go-to for sockets on the cheap. I noticed the other day my socket collection was in need of some more 12 points, both a sae/metric. Especially in the smaller sizes since I didn't have a 5/16 or 8mm when I was in need last week. I received both sets really fast and I've already used them a couple times. They seem very well made and even come in a nice case. The case is surprising due to the cheap price point but very appreciated. I'll update this review if I have any problems down the road with these but for now I highly recommend these over spending way too much on the tool truck or elsewhere. 5 stars!!

Good quality and a good value though the wall thickness is light in my opinion. My guess is that if you don't overdo it with an impact you will be OK.Sockets this small and the bolts they would fit shouldn't see over inch-pounds of torque on the small end of the sizes and yet, possibly well over 100 ft pounds on the largest 19mm. They are half the wall thickness of the 1/2" drive impact sockets so I would discourage you from using a 1/2" to 3/8" adapter with a 1/2 inch impact turned up to high. They are nice for getting into tight spots. So far, so good!The case is nice because sizes are marked and the sockets have easy to read sizes on them. I have no idea yet how well the marking will hold up.

was fine till i started hitting one with a hammer.. then it came apart at the metal seams (no pun). The socket sidewall bent trying to pull it off a bolt it was grabbing.. and sheered off a portion of the what i can only describe as a few layers of metal around the side wall after it cracked. The sockets performed under a Milwaukee 12v impact strength.. not that says a whole lot, the impact strength is probably somewhere around 40lbs on those i think.. anyways.. i'd buy again, but i have a ton of sockets.. i just needed a newer set... i'll look for the individual socket first this time tho.

I guess anything is cheaper than snapon. $25 for one 10mm 12point snapon socket.$25 for this whole set. Is. A no brainer. Lets see how long this will last. I had a 10mm 12point socket fron crasftman and lasted me 5 yrs lol

La presentación se me hace excelente, el estuche es de buena calidad y resistente, apto para transportarse. Aunque para mí es algo estorboso en mi caja de herramientas y terminaré colocándolos en un riel.Respecto a la calidad de los dados, comparando la masa de estos entre otros dados de impacto e incluso otros 'normales' (Craftsman), los Tekton son bastante más delgados, lo que me hace dudar que resistan el uso rudo.No obstante, aunque para mí pasan más como dados 'normales', el costo es excelente y por eso les doy 5 estrellas.Tengo más herramienta Tekton y me ha salido bastante resistente, por lo que espero que estos también aguanten.En cuanto los use con la pistola de impacto actualizaré mi reseña.

This is a fantastic set of impact socket. For the price, you can't go wrong. I could buy the same set from Snap-Off for $300, but these do the job so well, why bother. I'm using them in the big rig diesel technician territory, and I'll update this review if something changes as per quality or other things. Only one this that I dislike about these sockets is that they are laser etched for the sizes, and the etching can get scratched off if you're throwing you sockets around or using them in a deep hole where the walls make contact with the outside. But that's not a deal breaker for me yet.

A truly fantastic set of relatively thin wall 12pt sockets. Had no trouble with an impact (the 700ftlb dewalt) removing head bolts.The finish if great, they look professional and the fit on the fasteners I've used them on is fantastic.Case has thus far (only weekly use) has lasted since my purchase a number of months ago and seems of high quality.

Can't beat the price compared to the tool truck. Yes snap on warranties their very expensive sockets for life. But the only issue is he only stops by once a week normally. These arrive in 2 days and they are 1/10 the price and they also have warranty. You could have 2 of these sets on the go, one as a backup if you ever need to return a socket and your u are still going to be way up. I've used the 13,15 and 18 so far and they are very precise. I love saving money on tools.

The sockets are well packaged in a case. They look and work well nice thin wall. The reason I gave it a 4 star for durability is the size is not stamped into the socket , it's printed on I suspect like most the print will wear off . Other than that nice socket set.