ECOTRIC 1000 LBS Capacity Watercraft PWC Dolly Boat Jet Ski Stand Storage Trailer Watercraft Cart Watercraft Dolly PWC Dock Slipway Cart Adjustable Bunks W/ 4 Casters and 2 Brakes

I build a wooden one using pretty close to what an Youtube member built (3ftDeep). I also assembled this cart. I have only a few tools for building the wooden one so had Lowe's cut the wood all but the 4x4. The reason I bring this up is that my material costs were 150 bucks and that is without casters to do this and it took 2 days to do it because I study then act (being an engineer we do that (read directions also)). The metal cart was about 1 1/2 hours with a few mistakes but if you look at the diagram it is pretty easy to assemble. I question so of the hardware provided not the quality but the redundancy of lock washers and fiber nuts, only need one.The casters on this cart are huge well up to the task of carrying 1000 pounds that is a plus. The only thing I need to do is to go get a brace or bracket to support the fact that I had to extend the bunks as this cart bunk is not wide enough without doing that. The bracket provided would be fine for a lighter load but both of my jet skis are over 900 pounds and the brace is needed to support the vertical load.Other than these minor issues the cart is a good bargain. I base that on the fact I have about 16 hours of building the jet ski cart out of wood and cost more without casters. The wood cart is much more robust but not worth the effort when this cart does the same job. I do plan to remove the existing bunks and replace them with more robust bunk hangers and pressure treated 2x4 5 ft long.

Great price, great quality and simple assembly. I purchased this PWC cart for my Kawasaki 800SXR and it works perfectly! The only complaint that I have is with the exploded assembly drawing. I received four flat plates with tapped holes and I had no idea where they went. When I was getting close to finishing assembling the cart I realized I was short 8 nylon lock nuts. I assembled the lower half using the 8 nylon lock nuts when I was supposed to use the nut plates, the assembly draing showed the nuts not the nut plates. Not a big deal, I went to a local hardware store and purchased the nylon lock nuts which by the way are metrick M10x1.50. This was a great buy!

Great product, zero directions, missing 8 bolts. Luckily I'm handy and have a shop full of nuts and bolts. Sturdy, and does what I need it to do, which is hold a kayak. Very sturdy and I'm sure it would hold a wet bike or jetski.

As described. Easy to use

Some have complained about the instructions, they were ok, I was able to assemble with no issues.Let me first say they roll very well, and they are doing the job so far.I am concerned about the long term quality, they feel like over time they metal will fail.2nd time using the carpet is already torn. Super cheap carpet.The height is off. One would think these should be a standard height, but our Sea Doo Tailer sits lower than these bunks so we have to raise the trailer wheels by rolling over a lift to unload.When it is time to replace, I will replace with another brand that is more sturdy and the proper height.

I did not know what to expect when I opened the box. Many pieces and many bolts and nuts. This is not for someone who can't use tools. I do and I had I put it together in about 45 minutes. I was pleasantly surprised when done. I was extremely happy when I finally got my RIB (Rigid inflatable boat) on it with the help of my engine crane. My dinghy is made by Caribe and is model DL11, she is 11 LOA (length) and 5'6" beam (wide). Total weight about 600 lbs. I have on this dolly for work that she desperately needs. It holds the RIB with no problems. 2 wheels lock very secure, and I even got on the boat to do some work. Just make sure you get the balance right, and the dolly will handle a lot of weight. Very light, very tough and I am very delighted!

First off, product would not be easy to assemble if you are not able to build something without instructions. Provided instructions were no help and did not tell you which screw to use. Second, the stand bent the second I put my ski on it. Almost dropped a $20k ski. Thankfully got it back on trailer before it bending to the point of doing so. Reached out to seller and have yet to hear a response. I really hate to leave a bad review and rarely do, but with no response from the seller I unfortunately feel I have no option.

I had no issue with assembly, but I did read a number of reviews that showed a few tips. I'm also pretty mechanical. Unit is pretty sturdy. I had even jacked up one end to drain bilge after a wash out. Slipped off the jack & landed hard with NOT hurting anything. I may go back & either add spacers inside tube/bolt areas to keep tube from crushing and or spot weld the seams if I start to see problems. For the price. A good value. Also, no issues with wheel locks, but I may use with locks. Both work fine to stop movement & stop wheel from spinning around.