WOLOVEEVO Sight Pusher Tool for Handguns Heavy Duty Pistol Sight Pusher Tool Maintenance and Sight Adjustment Removal Tool

Have used this tool to install sights on several handguns. Unlike some other designs (such as MGW), this tool does NOT require the use of separate, additional-cost slide adapters for different handguns. Relatively easy to use and works well. The screws on the base are counter-intuitive (left to tighten, right to loosen) but it's easy to adapt to. YouTube videos are your friend. Overall, this tool is much cheaper than many competing models, works as well and doesn't require additional adapters at additional cost. What's not to like?

I was surprised by the capability. It even worked on my impossible Bodyguard 2.0 rear sight. It was difficult and I had to use two big box end wrenches for extra leverage on the handle and to hold the base in place even when it was mounted in my vice. I also had to apply some heat and some penetrating lube. Due to the tiny size of the slide it ended up bending near the ejection port so I recommend putting something solid that’s the same width as the barrel breech in the slide while pushing sights to prevent this problem. Leave it to S&W to put their sights so far off center and then make them so difficult to move. The front sight was no problem. I’m excited to have this for future use. I don’t see a need to buy the more expensive version when this is strong enough to bend the slide with no damage. Good quality especially for the price

This tool works great as designed. A few items to consider if you purchase - 1) the tool has no lubrication on the main drift screw. Before use add some anti-seize compound or heavy lithium grease to the threads and work the screw from end to end to coat it before putting it under pressure. 2) Sights being removed may be loctited into place or have set screws. Remove set screws and then use a drift punch with mallet to get the old sight moving. Remember it has been repeatedly hammered in place and may be in a slight indentation in the dovetail. This is the likely cause of seeming to need more pressure than the sight tool hand crank can deliver. 3) cut some strips out of a plastic milk carton to shield your slide. It is much better than tape. You must cinch down the slide both on the sides and on top to keep it from twisting. 4) Before removing old sights - put the new sights in a freezer to shrink them a bit for easier installation. Take them out just before installation to keep them as cold as possible. (one at a time is best). For more slack - put the slide in the sun or under a heat lamp to warm it up after removing the old sights. 5) When the sights are lined up on the dovetail you will not need any more pressure than hand crank to install. If you experience more - check dovetail alignment - slightly out of alignment can jam it up very tight. Be patient and check and recheck. 6) A depth micrometer or caliper with depth measurement is very handy for lining up dead center on the slide. Done correctly you will be very close to zero if not right on it.

Didn’t want to spend the money on this but for what it cost to have a gunsmith swap sights, once, literally paid for this tool. Only used it in a SIG P330 to adjust the rear sight. Worked (too) good. Have to go back and readjust again. Very sturdy construction.

Worth the money. Anyone who owns a Tisas knows that they can be a real pain and could easily run into the $100's for gunsmith work. The pusher itself is solid, the handles on the shaft are not the best and make leveraging strength/weight difficult, a breaker (cheat) bar will go a LONG way. All in all, it didnt break, did the job.

First and foremost, the build quality was outstanding. Made from durable materials, it felt sturdy and reliable in my hands. The design was well-thought-out, with a comfortable grip and smooth operation, ensuring that I could make precise adjustments without any difficulty. The ease of use was truly remarkable. With clear instructions provided, I was able to install the sights on my pistol within minutes. Adjusting the sights was a breeze, thanks to the intuitive design and adjustable components. Whether I needed to drift, push, or remove the sights, the tool provided the necessary functionality, allowing me to fine-tune my pistol's accuracy to my exact preferences. What impressed me the most was the versatility of the pistol sight pusher. It accommodated a wide range of pistol models, including popular ones from Glock, Smith & Wesson, Sig Sauer, and many more. This versatility made it a fantastic investment, as I could use it with multiple handguns in my collection. The tool also had adjustable features to accommodate different sight sizes, ensuring compatibility with various firearms. One of the standout features was the precision it offered. The sight pusher allowed me to make micro-adjustments with utmost accuracy, resulting in consistent shot placements. The tool provided excellent stability and control, eliminating the need for excessive force or guesswork. This level of precision was a game-changer for me, as it significantly improved my shooting skills and boosted my confidence on the range. Furthermore, the pistol sight pusher was designed to protect the sights from any potential damage during adjustments. The tool held the sights securely, preventing any scratches or dings that might occur from traditional hammering methods. This feature alone made the sight pusher a worthwhile investment, as it helped preserve the aesthetics and value of my firearms. In terms of value for money, the pistol sight pusher exceeded my expectations. It offered professional-grade performance at a reasonable price. Considering the cost of having a gunsmith adjust your sights every time, this tool quickly pays for itself. Moreover, its durability ensured that it would be a long-lasting addition to my gunsmithing toolkit. In conclusion, the pistol sight pusher is an absolute game-changer for anyone who wants to take control of their pistol's accuracy. Its top-notch build quality, ease of use, versatility, and precision make it a must-have tool for firearms enthusiasts, competitive shooters, and even professional gunsmiths. With this tool in hand, you can fine-tune your sights with confidence, resulting in improved shooting performance. I highly recommend this pistol sight pusher to anyone seeking to enhance their shooting experience.

Solid material! It does what it says it does! Easy to operate. Nothing complicated about its use at all!