














🔥 Seal the heat, save the vibe — your fireplace’s new best friend!
This 22mm wood stove gasket kit features a graphite-impregnated fiberglass rope that resists temperatures up to 600°C, ensuring long-lasting durability and a perfect seal. The full core design prevents deformation, while included high-temperature tape and silicone cement simplify installation. At 1.8 meters, the rope adapts to any stove or fireplace door, enhancing burn efficiency and maintaining optimal heat retention.


















| ASIN | B0B68JSPXT |
| Batteries Required? | No |
| Batteries included? | No |
| Best Sellers Rank | 154,255 in DIY & Tools ( See Top 100 in DIY & Tools ) 172 in Fireplace & Oven Sealings |
| Customer Reviews | 4.5 4.5 out of 5 stars (1,005) |
| Date First Available | 15 July 2022 |
| Item Package Quantity | 1 |
| Item Weight | 430 g |
| Item model number | 7/8" Gasket Kit |
| Manufacturer | Protalwell |
| Material | Fibreglass |
| Package Dimensions | 22.7 x 17 x 6.4 cm; 430 g |
| Part Number | G-K-78 |
| Size | 22mm (7/8inch) |
B**D
Great stuff
Just as advertised and ready to follow instructions. Easy to apply. Well worth it help keep the fireplace maintained. 👍🏼
C**E
Easy to fit
Used to replace a totally worn out gasket on a wood burning stove . When it was replaced using this kit, the door was a tight fit. However, a perfect seal which has eased with use. The fire now works perfectly and the burn rate is much better.
L**E
Enough rope and easy to apply
Fantastic rope that is really easy to apply, but I would prepare clean the door, and place the glue all around and then place the rope and weight down. Weight a good 24 hrs before reassembly and use! Could not fault this
S**N
Seems fine but glue the end sealing tape, poor adhesion
The rope was easy to fit and at time of installation on a storax riva 40 stove ,was a good tight fit .However,don't know how long it will stay like that . The end sealing tape was rubbish first attempt did not shrink on or stick properly… had to apply glue . The glue was fine at fitting and plenty plenty stuff to do job .
M**E
Good replacement kit
Perfect little replacement kit. Re sealed the door nicely. Made. huge difference in relation to the draw of the chimney. Easy to apply and works as it should. Hoping this will last a good few years.
A**R
Warmer room
This gasket was a much better option than the previous one we had used, it is the thickness of the 12 mm that has improved the heat output from the fire, it has made such a difference.
D**P
Worth making sure you get the right diameter
Did the trick and sealed the wood burner door much better than before?
D**A
Wood stove
Easy to fit
R**N
Bien , rapide et conforme
F**K
Très bon produit et tube de colle pouvant faire pas mal de joint supplémentaire
B**H
Arrived early. The gasket looked to be of good quality. It was pretty easy to install made a good seal on my pellet stove.
A**M
Great kit. Affordable. So far working perfectly. On my old stove. Before, Sometimes smoke would bellow out around the door when lighting the stove or backdrafts. So i installed this kit this morning and let the silicone cure a bit before lighting the stove. The first hour with the door wide open than the remaining cure time with door closed(door may struggle to close at first until a new groove is worn into the gasket) once i lit the stove the gasket made a nice inlay for a good seal. Note i put the cut rope side to the hinges (as thats the most clamping force) and also 45• cut both sides of the rope so it would overlap itself like a scarf joint in trim work. Instead of using that silly tape they supply. (Picture are before new gasket was installed) note the discoloration on the pellet stove door. Thats where heat and smoke was escaping before reseal)
C**N
Perfecta para este tipo de estufas,terminación de lana y el producto del pegamento tiene suficiente para su instalación.
Trustpilot
2 weeks ago
3 days ago