AM ARROWMAX Mini Electric Drill 13 in 1 with Aluminium Box, Cordless, LED Lights, Needle Vise Hand Drill Kit, 10 HSS Drill Bits, 3/32-Inch Keyless Chuck, Variable Direction ，(SDS MINI) Black

I run an art gallery and most of the time artists forget, or just don't add, the appropriate hanging wire on their work. Then I have to do it and a big drill is sometimes way too much and can cause damage to a canvas or frame. This gadget is so handy and easy to use! Small and light, it's easy to get a screw started in a tight spot and then I can get accomplished what I need to do. I have only used it a couple of times, so I cannot say how long the battery is good for, but, at this point, I find I definitely like the size and ability to drill into a wood canvas frame. I like that the bit sizes are varied as well because not all frames are the same size. I need smaller hanging hooks for smaller pieces and larger ones for larger pieces. I just keep it on the desk and near the charger. Eventually I'm going to need it. For now, the battery is doing fine.

It Works. A little smaller than anticipated but if you need for crafts etc. It's Good

It's not perfect, but it is very solid for what it costs. Primary drawbacks are the lack of adjustable speed and the simplistic trigger button. It's small and precise, easy to use for anyone who knows how to drill barrels and exhausts on their models. The max drill bit size is a bit lacking, but there are probably adapters for that. Don't expect to be able to drill magnet-sized holes out of the box.

Updated: 03-May-2023After the review below was posted, Arrowmax reached out and offered a full refund. My return window has expired when I posted the review below. I did not contact the seller to ask for a refund. The seller, on their own initiative, reached out and offered a full refund. Kuddos and respect to the seller for putting first their customers' interest.Initial review: 29-April-2023The drill, drill bits, and case all look nice and give the impression that it is a quality product. However, it does not do its function, which is to drill holes. The end of the drill bits that are inserted into the drill are round. Consequently, no matter how much one tigthens the drill chuck, there is not enough friction for the drill chuck to hold onto the drill bit once the drill chuck starts rotating and the drill bit encounters resistance from the material that one wants to drill a hole. I used this drill to drill holes on wood trim, which is not hard wood. The drill can manage to drill only a shallow hole. Once the drill bit encounters resistance from the wood, the drill chuck can no longer grip the drill bit. The drill bit stops rotating while the drill chuck continues to rotate, because the chuck is no longer gripping the drill bit.

My drill didn't charge I asked for a replacement and before I could even bring the defective one to UPS to mail it back yhey already shipped my new one! No questions asked! I did get to use the drill once on my model car (thats why I got it) and it was AMAZING I recommend this to everyone and the people I recommend it to yhat bought one swear by it, if your into modeling or any hobby that needs a PRECISION drill for SMALL stuff I highly recommend this your money is safe with this company

The drill itself it good and has reasonable torque. The collet is well made and runs true. Mine arrived without the base to post moubting screws included (3mm x 8mm). Luckily there is a hobby store that had them 2 minutes from my house.The press portion is really nice, well machined and precise. It would do well to have bronze bushings on the linear guide holes though.The controls are okay but not great. They could be more intuitive.The biggest issues are the RPMs. Max is 550 which is way below what a small drill bit works optimally at. I would recommend making this drill setup able to go to near 1500rpm to make it optimal.The drill bits are abysmal...they aren't true which is a very big deal for a small drill bit. They are really dull. I sharpened mine using a ceramic finishing stone and a microscope to ensure aligned edges with the correct geometry. Truing them was a bit more work and something that has to be done carefully to avoid breaking them.I would recommend they spend more on the drill bits, forget the tialn coating as it's unecessary and a waste of expense. Also sell drill bits of different sizes as an assortment (sets of taps would be nice too). A master set of 20-30 SAE and Metric drill bits (all sharp and true running) would be a great companion. A set of micro taps would ve great too. If they make one with the better bits, increased rpms and a large selection bit set for it, I would definitely buy it. I'd probably end up using this one for tapping at that point given it's lower rpm range.

Love this little drill.It's super light.Has good rpm.Just have to be mindful of the pressure you put on the drill bit when using the micro ones.

Motor brannte bei der ersten Verwendung beim Bohren eines 2mm Lochs in eine Leiste aus Weichholz durch. Gerät sieht wertig aus, ist aber billigste Ware aus China. Der Name Arrowmax suggeriert einen englischen oder amerikanischen Hersteller, ist aber einer der typisch chinesischen Billiganbieter (made in Hongkong).Gerät wurde zurückgeschickt.

Piccolo, leggerissimo trapano con progettazione geniale e attenta a chi lo utilizza e design pratico e raffinato. Funziona molto bene e ha una bella gamma di punte da trapano per lavori miniaturizzati in legno. Ha dei led sulla punta: molto utili.La colonna di supporto è leggera ma funzionale. Come il trapano e le punte, è contenuta in una scatola perfetta e ben pensata per il trasporto. Complimenti a chi lo ha progettato.

Premesso che la spedizione Amazon è arrivata con giorni di anticipo, per cui nulla da eccepire a riguardo, le riserve purtroppo emergono sulla funzionalità del prodotto.La foto allegata mostra la carica residua dell'utensile appena estratto dalla confezione, e ritengo pronto per il lavoro da affrontare, (dato che la sera prima era stato caricato completamente apposta).Mi ritrovo invece a dover nuovamente ricaricare l'utensile per poterlo utilizzare.In buona sostanza NON TIENE LA CARICA.Questa è la terza prova che faccio, e purtroppo non ho dubbi a riguardo.Sono tentato al reso.

Petite perceuse à colonne qui s'avère être de piètre qualité, le jeux au niveau du mandrin s'avère assez important, en tout cas, suffisamment pour la rendre imprécise, donc gadget inutile et trop cher pour une aussi mauvaise conception.Faudrait aussi revoir le système d'abaissement de la colonne, une tige de quelques centimètres serait bien plus pratique et précis à l'utilisation qu'un bouton rond comme c'est le cas dessus.Dommage car ça ne tient à pas grand chose pour en faire une excellente mini perceuse à colonne...

The drill is of excellent quality. The three fixed speeds are actually 400, 550 and 700 rpm (per the LCD display).In automatic mode the speed ranges from 200 to 700 rpm (in either direction) by holding in the button and varying how much you rotate your hand. Furthermore, if during this mode you release the button, the speed is locked at whatever it was at that time. Locking it at 200rpm will be useful for plastic models.