Air Suspension Valve Manifold 1/4" NPT Kit with 8 Air Ride Solenoid Valves, 9-Switch Wired Remote Controller Can be used for Air Bag inflation and deflation.

Hooking it up is easy no problems the problem is it don't work right one of the functions don't work at all and some of the others just work when they want to

Not all the buttons works as they should. I suspect maybe a diode inside is wired wrong or bad. Center all up for instance doesn’t put all 4 up. Price is fair but beware.

I've been using this type of manifold and valve body for a while and they work pretty good for the airbag set up on my truck. This one is a particularly good deal because it includes the switches and harness. Not all of them do!Pros* Super easy set up because all the connections are direct to the manifold, you'll save a mint on fittings and tape as compared to separate valves.* These valves flow a reasonable amount of air for a passenger vehicle. If you have huge airbags, you may want to do valves with a larger orifice. This setup flows a reasonable amount of air so you can control how much air goes in the bags.* All holes are drilled and tapped NPT so they work fine with standard air fittings.Con:* The seals on these dont last forever in harsh environments, but the solenoid body comes apart so technically you could replace them. It's probably more cost effective to replace the whole unit.* No instructions or labels on the switches.Things to note:The Switch body is wired roughly as follows:Top row - Left Front - Both - Right FrontMiddle row - Left F/R - ALL - Right F/RBottom row - Left Rear - Both - Right RearAgain there are no labels on the switches so you'll just have to remember or make your own.This body is drilled to have individual 1/8" NPT pressure sensors to monitor the pressure in each airbag individually. If you're not using gauges, you'll need to plug these holes. The input and exhaust is drilled straight through so you could input or exhaust air from both sides. Again a plug will be needed if not using all of these.

The top switch doesn't function so you can not raise the two air bags at the same time. Just installed and doesn't work out of the box of course I waited til after the return window to install.

I purchased this taking a chance that it could be low quality and it sure is. Of course I purchased it over a month ago and never installed it until today. One of the valves just leaks on the left rear. Constantly filling that corner. I tried to cyle the valve and see if it would seal up. No good and too late to return it. Do Not buy this junk