ELEGOO ABS-Like Resin 3.0, Photopolymer Resin UV Curing 405nm, Upgraded ABS 3D Printing Resin, Higher Precision, Lower Shrinkage 3D Resin for LCD/MSLA/DLP 3D Printer, Grey 1000GCarbonfree Certified

Love this resin compared to standard UV resin. Be sure to calibrate the resin 'first' to your printer using 'Cones of Calibration' prior to printing out your prints. Once successfully calibrated, this will eliminate fails and ensure you get top notch prints. Great resin for the price. Will continue to purchase so long as Elegoo doesn't jack up the price. Kind regards.

I got the White, and there's no streaks or visible separation if it sits in the vat for days. It looks the same. It's kinda thick, so the extra doesn't quickly drain from the hanging build plate. Minor inconvenience if you're in a hurry.It washes off fine in an ultrasonic cleaner using water, with a bit dish detergent and some bartender's friend cleanser. That stuff has oxalic acid which seems to help a lot.Post curing under UV for a long time yellows it a bit...These ABS-like resins are a great improvement. I don't know how they make it, or if the qualities decline over time, but it's easy to print with, it's hard and it's strong. Thin sections are springy. Thick is rock hard.I printed a mold, and then had to break off parts of the mold without destroying the molded (epoxy) part inside (no parting compound required). Forget about cracking it open... It resisted the heat of a soldering iron. It doesn't melt but at some point, perhaps around 600F, an internal bond weakens, bits can be scraped away, and then you might break chunks off of it.Since it resists heat, I made some electrical soldering jigs from it. They hold wires in position while I solder them together. It can withstand a lot of heat. No other filament or resin that I have can do this...

This stuff is like liquid gold. I love it for the detail and toughness. The price is perfect but if it went up in price it wouldn't be worth it.

Crack very easy, good quality and detail on print, but not enough tough

I have three printers and do a lot of printing and I use elegoo for most of my printing needs. I like the ABS for doing things such a small weapons belts and cables that would tend to break sometimes when they're moving supports. The resin is always very smooth cleans up easy and I hardly ever have failures and usually it's because of me and setting up my supports incorrectly... Verizon gets great detail and cures very well

Original ,recomendado, perfecta imprime con muchísimo detalle a 2 segundos de exposición en mi elego mars 5 ultra , el olor es sutil, y la calidad es buena a diferentes temperaturas..

It's good

great product, fast deliverly