Sea Bond Secure Denture Adhesive Seals, Original Lowers, Zinc-Free, All-Day-Hold, Mess-Free, 30 Count (Pack of 1)

(I only have upper dentures and real teeth on the bottom). I've seen a lot of reviews on this product and most of people that have a problem, it is with cutting and fitting the pads and overall hold. I found that cutting the pad and making a cardboard template of it until you find one that works and keep that template. As far as how it works, it does not have the hold of denture adhesive cream, but works for most foods, but for really hard or difficult foods the cream still works better, but what is nice the pads clean up so fast you can easily take the pads out quick and put cream in if you know you are going to eat difficult foods. The best thing about this product is how easy it is to get out of your mouth and clean off the dentures compared the adhesive cream, which is a chore and can lead to sores in your mouth over time just from removing it.

These Sea Bond Secure Denture Adhesive Seals function as I hoped; they are absolutely worth the money I paid, and the quality is top-notch. As with any other denture adhesive product, be sure to read the instructions to learn how the strips function, their longevity once installed, and any other information that will help you. I did, and that made all the difference. These are high-quality denture strips that grip very well.

Work like a charm. use them everyday. No taste easy cut to fit and install and simple to remove

So it took a little getting use to and figuring them out to work correctly. I , 51 female have upper dentures do to an accident when I was a kid. Suffered many years trying to keep my teeth but lost the battle. My denture fit at first but over time needed adjusting. However the one person I went to shaved off way too much and I was in a lot of pain and they didn’t stay in. I had an assistant show me the best way to apply poligrip and that worked. However I felt my dentures were still causing a lot of pain and pushing up on the roof of my mouth so badly I couldn’t keep them in. So I started trying this product. Instantly the pain went away and they stayed in. However they did not work well when I wanted to eat. And sometime they were loose and didn’t hold well. I was trimming them down to, what I thought, was fitting my mouth better. The directions say, do not over saturate,,, well how the hell do you do that when you need to wet them!!! Over time I have learned,,, I do not need to trim the sides only the length. The flat part that goes to the back of the mouth. I leaned to dry the dentures very well before placing the pink side down onto the denture. The pink side is went the top side just damp. I run a very small stream of water and wet the pink side. I make sure the side of the pad go up the inside of the denture. Some times I have to push the pad down or up or back what ever. To make it fit where I want it. Make sure there are no bubble. There is play time to adjust. The front part dose over lap sometimes depends on if I am in a rush but it doesn’t make a difference if it does or doesn’t. Once I put them in a clap my jaw down for a bit. The wear time is not super long.. Sometimes I can where them all day and over night but mostly I change them after I eat. If I have had them in for a while when I eat, the pad slide and I feel the pad going past the denture into the back of my mouth. Or food getting stuck up in there. So I try to change them at least once a day sometimes twice. BUT I would much rather deal with this that trying to scrap poligrip out of the denture and out of my mouth. I find that disgusting!! I use poligrip in the event that I might be going out with friends for a long evening But I have started putting a pre cut pad in my purse so I can alway run to a bathroom and change it. Super easy!! Worth trying if you don’t like the gunk in your mouth like me!

Purchased for my friend who has bottom dentures and is struggling to find something to hold her dentures in place. I remember my grandmother using these and they worked amazing. So order some for her and she said they work well.

I never post reviews but, in this case, I think I am performing a public service. I've been using Sea Bond for more than seven years but Sea Bond wafers did not work well for me until I hit upon this seemingly backward way of installing them. Done my way, you will actually have to pry your dentures out and you may find it difficult to remove the wafers because they are so tightly bonded to the plastic material. (Pro tip: use a sheet of paper towel to get a grip on the slippery used wafer.) The problem with Sea Bond wafers is that the instructions on the packaging are actually absolutely wrong if you want a nice tight, long-lasting grip for your dentures. Here's how I use them: 1. I cut the wafer to size making sure that the sides of the wafer come ALL THE WAY UP TO THE TOPS OF THE OUTER RIMS OF YOUR DENTURES BUT NO HIGHER when I press the wafer into the gum channel. (This may take some practice to get it right.) 2. Spray the PINK SIDE OF THE WAFER with a light mist of water and then put the wafer (pink side down) into the denture, making sure to press it down into the gum channel. This activates the adhesive more effectively than the method recommended by the manufacturer. Make sure there are no folds or bends in the material. 3. Next, spray the top of the wafer lightly, then insert the denture, seat it and bite down for at least 30 seconds. (One minute is better.) Now, if you have been wearing dentures for a while, you know all about gum recession. If you are not in a position to purchase a new denture, try using TWO wafers, one on top of the other. I've been doing this for more than two years now and the results have been very satisfactory. If you decide that you need to use two wafers, make sure that you line them up and cut them to size at the same time...and make sure that you give the upper wafer a good drenching before you insert the denture into your mouth. Note that this advice is based upon using the Sea Bond wafers for UPPER PLATES only. I don't have a lower plate but I don't see why method would not work for the lower plates as well. I hope this helps. If it does, drop me a line. If it doesn't, drop me a line anyway, I will try to help you figure out why it's not working. (In one case where this did not work, the user had very hard water.)

It was hard to use

Buenísimas, fijan súper bien la dentadura para todo el día. La verdad si muerdes una manzana si se mueven Pero en general queda fija. Hay que cambiar la almohadilla todos los días. Siento que valen lo que cuestan

Seabond works great

They do what it says on the box

Produit décrit

Smashing