ArnottSK-2954 Front Coil-Over Shock For 07-14 Compatible with Cadillac/Chevrolet/Gmc Suvs-Swb Gmt92X & Lwb Gmt93X/Gmt94X -Lt/Rt

I installed these on our 2012 Cadillac Escalade ESV 2WD and man what a difference. The truck had been riding extremely rough and I couldn't figure out what was wrong. I checked the struts over several times and they appeared to be fine. The tires weren't wearing or cupping and the only symptom I had was the super harsh ride. I figured we would give these a shot not really expecting much and about ready to sell the truck if it didn't work. Installing these struts took about 2 hours using standard tools. Now I'm no pro but I do wrench on my own vehicles. The instruction were easy to follow especially if you have experience wrenching. The magnetic ride bypass resistors were easy to install and work perfectly. But the big story here is the ride when I was done. It rides like a brand new truck. The harshness is gone and this Caddy rides great even with 22" wheels.

Installed into my 2013 Escalade esv. Easy the bypass sensor worked great. No dash lights. They are about 1/2 longer than the stock struts so it sits 1/2” higher. Looks fine. Rides great. In order to install properly bolt up the top then push down over the rotor and push the strut into place. It’s easy install just a little confusing when you see they are a little longer than the stock struts. You’ll prob need to replace your sway bar tie rods too. Mine were completely missing when I worked on the struts. But that’s a totally different issue /repair.

product works but by-pass stopped working after 30 dayslights are on.

This was such a simple install and I am very impressed. Our 2011 Escalade ESV was starting to ride really stiff, so stiff it was almost nauseating and you didn't feel like you had control of the car. I had the old struts out and the new ones in in about 1.5hrs. The bypass sensor was super easy to install, it just hooks up to the original harness and can be only installed one way. It's notched on one end so make sure you have it in correctly, you'll know. Our caddy feels like a new ride now and I can't wait to replace the rears.

Good seller. Received earlier than I was supposed to and got what I ordered.

These are amazing! Fit perfectly on my 2011 Escalade ESV and the ride is perfect. Sensors plugged right in and no lights on the dash. I reused the factory nuts on the top of the struts because they seemed to be a little beefier than the ones Arnott supplies. Highly recommend these!

No es buen productoNo tienen nada de resistencia y no hay donde reclamar

This product is not compatible with lift kits designed for OEM auto-ride suspensions. The loop on the end is much larger than the OEM originals. Since you must remove the bushing piece to add the strut extenders needed for the lift you will be stuck with a part that you can't use or return. Our truck has had a lift on the OEM struts for several years, but it was time to replace the struts. Since the manufacturer states these are "OE quality and fit" I thought they would work. Now I'm out a couple hundred dollars.I tried working with the manufacturer to resolve my issue or return the part and they were not at all helpful.