Raptor Black Urethane Spray-On Truck Bed Liner Kit, Protective Paint with Spray Gun, for Tailgates & Trucks, Vehicle Undercoating, 4 Litres

Ordered this kit to do a weekend project on my Xterra. The plastics and bumpers on my truck were heavily faded and I wanted to spruce everything up. Gave this kit a shot.Prepping the surface is absolutely THE MOST important part for all of this. I sanded everything down with 120 grit. Afterwards I wiped everything down with rubbing alcohol. About 10 minutes prior to painting I sprayed adhesion promoter on the plastic parts.This kit super easy to use. Just crack open a can, pour 8 oz of hardener in, re-cap, shake for 2 minutes and attach to the provided spray gun. Then paint away. All you need is an air compressor. Actual painting took me no more than 10 minutes per coat.I shot my first coat at 40 psi from about 12 inches away and the second coat was applied at 65 psi from about 2 feet away to get the texture I desired.In all, I am very pleased with how everything came out, especially given this was my first time painting ANYTHING. This stuff seems very durable especially given other people's tests and reviews so I'm confident this will hold up well.One thing to note: You do NOT need an air compressor that puts out 8 CFM @50-60 psi that's recommended in the instructions. I used an $150 8 gallon compressor that only puts out 3.5 CFM and it had no issue staying at the desired pressure.

I sprayed this on the inside of a1980 Jeep cj5 tub Removing parts cleaning and abrading the surface and final cleaning is 80 percent of the work. 10 percent is masking and wrapping. Sprayed at 60 psi following the directions.The results awesome and better than expected. This was my first time attempting to shoot this type of product and it was easy

Great value for the price. Took me almost two days to finish because for this job prep work is everything. Quality is top notch. Very easy to mix and apply. I am very pleased with the result. No complaints so far I hope it will last.

The application of this product was easy to use and looks great. The product application kit allows a professional result, and I would recommend this product. This review is based on the application and visual result upon completion. I used it on a short box truck (6'-10") and used all 4 cans in the kit.

The most difficult part is the prep work. Do not cheat on this. Takes 2-3 hours sanding the bed depending on size. Then another hour to tape it up and clean everything. Spraying so simple keeping about 2 feet away. Dried to touch within the hour and it looks really good. Also take your time taping so you get nice crisps line. Definately a savings. All I. $175. I was quoted $550. I am happy.

Besides where we hit something metal with the area sprayed it's held up better than the standard paint we sprayed on the same vehicle.

So far so good. Spent a lot of time in preparation , so the installation went on flawlessly. After a month, the product looks GREAT!

My truck bed turned out so nice, I decided to do my Jeep too. Super easy prep with a nylon bristle and acetone.