💦 Dive into Quality with Every Seal!
The TorkDistributors 2" PVC Slide Valve O-ring Kit is a comprehensive replacement solution for pools and spas, featuring two piston seal O-rings, a small O-ring, and a valve O-ring. Made from durable Professor Foam, this kit offers OEM quality at a fraction of the cost, ensuring your pool or spa runs smoothly without breaking the bank.
S**K
Perfect. Exactly what i needed, and a tip for the small oring
These worked well. My old prings were flat and needed to be replaced. The main reason for purchase was the small oring that was leaking water out of the top. Not a huge amount of water, but it bugged me and I knew it wasn't going to get better. here is a tip when replacing the small oring.You have to pull the roll pin out of the handle. The best way to do this, without destroying the pin's shape, is to insert the shank of a small drill bit inside the roll pin. Once you do that, you can clamp down with some vise grips and it doesn't flatten or break the pin. Rotate the pin some to break it loose before you pull it out. I gently pried on the vise grips to get them to pull the pin. Don't over do it. It is a slow process and you don't want to bend the pin. I had to reclamp once it came out some and then prymon it some more. Once it is out, itnis easy to separate the handle and replace the oring. I sanded the roll pin with some 1000 grip sandpaper and cleaned the hole before I put it back in. I used a decent size set of channel locks and it went back in smoothly. Don't forget to put everything back together before you put the pin back in. Use some magic lubes on all the orings before you reassemble everything.
N**E
Good kit!
Good kit everything fit perfectly!
M**X
Good Value
These orings worked great. Stopped leak and were a good value. Will purchase again.
A**X
3 of the 4 were good for Pentair 273241
If you have a Pentair 273241 piston flow back valve the small O-Ring provided (for the top of the shaft handle) is too small. I think this was mentioned in other reviews and I did not take notice. Be sure to do what I did not. Rule #1 always compare side by side the old with the new before re-assembly. If I had done this (and I typically do) I would have easily caught that the small O ring in this kit is too small. The other 3 O-Rings are fine and fit this piston valve. Luckily I found the original in the bin. Rule #2. Never throw away originals until job is done and correct operation (no leaks) confirmed.
J**N
Great rebuilt kit
The push pull valve on our system was leaking pretty bad. This oring kit along with magic lube fixed it right away. I only needed 1x of the big o-rings and this kit comes with 2x. Everything fit well.
M**C
Good price. Exact fit.
My 3way valves leaked for several months before I noticed the problem. The kit cost considerably less than the name brand. It was an exact fit and immediately cured my problem
E**E
The small ring for under the handle is too big. Not the right size for Hayward valve.
3 out of the 4 ring were the right size. Small one is too big.
C**D
Did the trick!
Worked perfectly
Trustpilot
2 weeks ago
2 months ago