Is the outdoor sensor "hi quality"? I have had 2 Acurite outdoor sensors electronics fail in a 1 Yr. I am a full time Rv'r / camp in any weather

I bought an Ambient 0900 weather station 6 years ago and took it down today. The base unit (inside the house) had failed, probably due to a power surge. Amazingly, other than turning from white to beige, the sensor array was just as functional as the day I put it up. Even more remarkably, its two AA Energizer batteries (never use Duracell, which leaks!) only needed one change in that 6 years. I note that this sensor array uses similar construction, including stainless shafts and ball bearings. It might even be possible to replace the anemometer and wind vane if they should ever break. As shipped, the user installs those onto the stainless shafts with set screws. So in short, yes! I didn't expect much from my last unit, but it certainly went the distance - far more so than my prior Davis anemometer!

What differentiates this from higher priced options like the ws-1002-wifi? Software connectivity doesn't matter to me. Are the sensors lower quality?

No, they are of equal quality. The console on the WS-1002-WiFi is much nicer with multiple screens and TFT display. This is LCD with color film. The WS-2902 is a very capable unit.

Can it only be line of sight ?

Wireless devices transmit a radio frequency (RF) signal, generally in the 400 – 900 MHz range. The manufacturer will rate the maximum transmission distance as line of sight. However, the signal will transmit through walls and other obstructions. The following is a table of reception loss vs. the transmission medium. Each “wall” or obstruction decreases the transmission range by the factor shown below. Medium RF Signal Strength Reduction Glass (untreated) 5-15% Plastics 10-15% Wood 10-40% Brick 10-40% Concrete 40-80% Metal 90-100% RF will not transmit through metal barriers. If you have aluminum siding or a metal roof, it is unlikely the RF signal will transmit through this barrier. RF will not transmit through earth. For example, if the receiver is placed in the basement, and the earth or ground is obstructing the line of sight transmission, it will not receive the signal. Interference can be an issue. In general, wireless internet, phones, security systems and other low power devices have little interference effect. Ham Radio and other high power applications may lose data when transmitting. Helpful Hint: Wireless phones transmit at similar frequencies and power levels as wireless weather devices. If you have a wireless phone (not a cell phone), place the receiver where you would place the weather station receiver and attempt to use the phone where you would place the transmitter. If you can not use the wireless phone, it is unlikely the weather station will work either.

Can i use 2 separate display consoles with the ambient weather ws-2902? i'd like to see readings in 2 different areas of the house.

I have two display consoles and it works great. One upstairs and one on ground floor. I can see both on-line and on phone via app. I set alerts in case HVAC issues, which is great benefit as well. I ordered WS-2902A-CONSOLE-KIT which is what you need.

Brand	Ambient Weather
Recommended Uses For Product	Garden
Specific Uses For Product	Rain Rate
Power Source	Solar Powered, Battery Powered
Special Feature	Wireless
Material	Plastic, Metal, Acrylonitrile Butadiene Styrene (ABS)
Connectivity Technology	Wi-Fi
Number of Batteries	3 AAA batteries required.
Style	Modern
Colour	black" or "dark gray
Are Batteries Included	No
Sensor Technology	wireless sensor, temperature sensor
Upper Temperature Rating	149 Degrees Fahrenheit
Item Weight	1.77 kg
Shape	Rectangular
Display Type	LCD
Global Trade Identification Number	00816982017796, 00768795832403
UPC	768795832403 816982017796
Country of Origin	China
Item model number	WS-2902C
Product Dimensions	19.05 x 1.91 x 11.43 cm; 1.77 kg
ASIN	B01N5TEHLI

Ambient Weather WS-2902 WiFi Smart Weather Station

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions