Applications:
For use with water-cooled TIG torches
For use with water-cooled MIG guns

Specifications
Model: WRC-300A
Protection Level: IP21
Cooling power: 1.5KW(1L/min)
Pump power: 260W
Rated water flow: 7L-12L/min
Water capacity: 10L
Max pressure/head: 0.4Mpa/60Hz
Rated lift: 32M
Operating temperature: -20℃— 60℃
Gross Weight: 16kg (35.3lbs)
Package Size: 21.3"*16"*13" (540*410*340mm)

Feature:
Efficient cooling of water cooled TIG torch
Compact design
Large fan
Stainless steel pump
Copper radiator
Adaptable to other brands
Quick couplers
Rapid, leak resistant connections

Precautions:
1. Please read the instructions carefully before installation and operation
2. Confirm the input voltage. (See the nameplate on the machine. Incorrect input voltage will damage the machine.)
3. If the cooler has not been put into use for long, please restart the motor and make sure the water is pumped out to prevent damages of water cooling torch
4. Make sure the tank is filled with clean water and all the connectors is fixed firmly. Always keep enough water (over safety line) in the tank, or the pump may be damaged by water shortage
5. If the motor works properly, but water draining is small or even no water, please pump in pressure air from compressor to inlet or outlet for 20 seconds
6. If the motor does not work:A. Input voltage too low, please change electric supply; B. Starting capacitor might be burnt out, please change a new one
7. IMPORTANT--The unit should be kept on at all times during welding to prevent damage to torches and cables

Package Content:
1 X TIG Welder Water Cooler
1 X Water Hose
1 X Inlet Connector
1 X Outlet Connector
1 X English Manual

Brand	DIYAREA
Model Number	WRC-300A
Colour	Green
Package Dimensions	54.71 x 41.5 x 33.91 cm; 15.93 kg
Material	Stainless Steel
Item Weight	15.9 kg

Tig Cooler, Tig Welder Torch Water Cooling system, 10L Water capacity,7L-12L/min Rated Water Flow with Flow Alarm, WRC-300A 110V

Description

Specifications

Common Questions