Washer Tub Bearings and Seal Kit for Samsung Replacement Parts DC62-00156A, 6601-002632, 6601-002516 Fit for Samsung Washer Seal Bearing Kit

My 6 year old Samsung WF45K6200AZ/A2 Washing Machine was getting louder in the spin cycle, like an airplane taking off. The door seal also looked moldy (actually combination of mold and grease/rust) no matter how much I left the door open and dried it out. Reading about these front loader machines it seems because the tub sits on a spindle, sideways, the seal and bearings eventually wear out. I ordered the most common Samsung bearing kit here on Amazon but of course it was not the right size bearings. The bearings on my Samsung WF45K6200AZ/A2 Washing Machine are very large (72 and 80mm) and the seal was shot and the bearings barely turned smoothly. The bearings were rusty and due to water intrusion, oozed some of its grease out into the drum. I think that is what happens when the seal looks moldy and discolored. It is actually rust and grease that may promote the mold that stains the seal. I ordered this one with 2-day shipping. Keeping careful notes and taking picture it still took two hours to take it apart. Then another 2 hours to clean all the parts as everything had sludge on it and the hoses were partially clogged. The part actually came in 2 days over the weekend. Followed my 52 step hand written notes and pictures, but still got confused. Watched some videos to remind myself and the rest of the installation took 2 hours. I am an experienced DIY, it took me a total of 6 hours. Finally, the washer is quiet, working like new and no leaks. The time and all these steps are not for the casual DIYer as it would be easy to miss a screw, o-ring, damage wire connectors or the new bearings. Best tip is to put the bearings in the freezer for several hours so they shrink a bit, so tapping them in is easier and won't damage the bearings. Thanks Amazon for the quick shipping, saved me over $1,200 for a new washer.Update: Almost 6 months later still perfect spin and no noise or leaks. If you take your time and careful notes it can be done properly. Another way to decide if you want to tackle this project is by calculating the savings it's $1200 for a new washer / 6 hours= $200 an hour I just made. Without the hassle of ordering, waiting and delivery.

I got this kit thinking yes one stop shop, maybe I got a set of bad bearings maybe they just suck, but all I got was about 3 months out of the bearings. Everything fit perfectly, I couldn't be happier how well this set went together. Unfortunately the function of the bearings is less then satisfactory.

Why did you pick this product vs others?:This worked great. My samsung washer was getting loud and louder with each load and I was worried it'd start taking out the shaft. The price to fix it from someone else was more than the washer cost because you have to tear it down to the drum. But youtube to the rescue with videos of how to tear it down and replace it. It takes around 2-3 hours depending on your technical level. I was able to get it apart and replace the bearings. My biggest concern was the rear bearing (on the exterior) had the race seal slightly pushed in. I don't think it'd impact anything as it was on the rear part where the motor goes. That shouldn't impact it because you have the seal, the first bearing, and then the seal on the 2nd bearing before you get to the exterior. I guess we'll find out in a few uses but I'm not concerned and I'm not talking it apart again. A great set and fit in nicely.

Fast delivery, good product and fits well. Normally don’t do reviews but this time is worth it

The media could not be loaded. This bearing kit fits model number WF45T6000AW/A5 . Its only been a few days so we will see how long they last but so far so good . Unfortunately I didn’t take a before video , but it was very loud ! I only gave 4 stars because I don’t know how long they will last

If you are a DIY R and have a free day and want save 1000$ on a new washer, this item is pocket change. My washer was making an excessive load noise on spin cycle. I was confident it was the bearings similar to the bearings on a vehicles wheel hub. The hardest part was removing the springs that hold the drum as it’s heavy because of the counter weights. Don’t bother buying a bearing puller, I used a 1/2” socket extension and mallet, just go easy when beating out the old bearings. Placing the bearings back is easy, rent a bearing driver from auto zone or oriellys it’s free or use a peace of 2x4 to prevent damage to new bearings. This bearings were economically price and now my was washer is spinning silently. Make sure to take pictures when pulling washer apart, there are great videos on you tube. My washer wasn’t listed on description but this bearing fit perfectly. MODEL: WF45R6300AV/US

It only lasted 5 months, do yourself a favor and buy better bearings.

Zero stars. The bearing was crap. It made sound even before I put back the machine together.Like what a waste of money 🤬🤬🤬🤬🤬.Do not by this bearings. They are not built for washers. Probably meant for something else but not a washer.I repeat, DO NOT BUY!!!! this bearings for your washer. Maybe for your garage door or something else but not for your washer.